Waterproof Wind Turbine Charge Controller, Size 220v Key benefits Protects batteries from overcharge by automatically controlling turbine output and engaging an internal brake when the battery reaches full charge. Works with multiple system voltages for flexible installation and wider compatibility. Robust waterproof design and low standby consumption make it suitable for outdoor and remote installations. Main features Function: Automatic battery charge control for wind turbines with an internal braking circuit that activates when batteries are fully charged to reduce overcharge and improve conversion rates. Rated application power: 2000W. Rated operating voltage: DC12V, DC24V, DC48V, and 220V. Size: 220v. Color: Orange. Material: Plastic housing for light weight and corrosion resistance. Static power consumption: less than or equal to 15mA, minimizing parasitic drain. Protection level: IP67, rated for dust tight and temporary immersion conditions. Package contents: 1 waterproof battery charge controller. Additional note 3000W controller option: A 3000W controller variant is noted as suitable for use with turbines up to 10000W. That variant also provides automatic charging control and automatic braking via its internal circuit to help optimize energy conversion. Practical applications Off grid cabins and remote homes: Integrate with battery banks at 12V, 24V, 48V, or 220V to manage wind turbine charging without constant supervision. Marine and coastal installations: IP67 waterproof protection and plastic housing help resist moisture in boat, pier, or shoreline setups. Remote telecom, CCTV, or sensor sites: Low static power consumption reduces battery drain during standby while maintaining automated charge control. Compatibility and installation notes Designed to work with battery systems operating at DC12V, DC24V, DC48V, or 220V. Confirm controller power rating and system requirements before installation. Ensure wiring and fusing match the rated application power and system voltage. Follow standard electrical and installation practices for wind turbine charge controllers. What you receive One waterproof battery charge controller, color orange, in plastic housing, IP67 protection. Static power consumption less than or equal to 15mA. Rated application power 2000W with supported operating voltages DC12V, DC24V, DC48V, and 220V. This controller provides automated charge management for wind turbine systems, flexible voltage compatibility, and a waterproof enclosure suited to outdoor use.