220V permanent magnet generators, available in three configurations for different power needs: 2000W brushless, 1300W, and 800W. All units use permanent magnet design with pure copper coils and include a 220V regulator. Rated speed range 900 to 6000 rpm to optimize conversion efficiency across light and heavy loads. Key features Models: 2000W brushless permanent magnet, 1300W permanent magnet, 800W permanent magnet. Voltage: nominal 220V with supplied 220V regulator. Windings: pure copper coil for improved conductivity and thermal performance. Drive characteristics: speed range 900 to 6000 rpm for flexible output based on engine or prime mover speed. Lowspeed and speed outputs for 1300W and 800W models: at 900 rpm the 1300W model produces about 600W and at 6000 rpm it produces about 1300W; at 900 rpm the 800W model produces about 200W and at 6000 rpm it produces about 800W. 2000W model is brushless permanent magnet design, rated at 2000W output with included 220V regulator. Benefits and why this product is useful Choice of power levels allows selection for specific needs, from light charging loads to higherpower applications. Pure copper coil construction supports consistent electrical performance and longer service life under typical operating conditions. Builtin 220V regulator simplifies installation and helps maintain stable voltage for connected equipment. Wide rpm operating range improves compatibility with different engines, turbines, or other prime movers, enabling better conversion efficiency at both low and speeds. Brushless 2000W option reduces mechanical wear and lowers routine maintenance compared to brushed alternatives. Typical applications Offgrid and backup power for small cabins, workshops, or remote equipment. Auxiliary power for boats, recreational vehicles, and mobile workstations that require 220V output. Power source for charging batteries and running tools or appliances where engine speed varies. Technical summary 2000W model: 220V regulator included, brushless permanent magnet, 2000W pure copper coil generator. 1300W model: 220V regulator included, permanent magnet, 1300W pure copper coil generator; output approximately 600W at 900 rpm and 1300W at 6000 rpm. 800W model: 220V regulator included, permanent magnet, 800W pure copper coil generator; output approximately 200W at 900 rpm and 800W at 6000 rpm. Speed range: 900 to 6000 rpm. Nominal output voltage: 220V. Compatibility notes Designed for integration with engines, turbines, or electric prime movers that operate within the specified rpm range and require a 220V AC generator. Check prime mover speed and control requirements before installation.