CO2 Tank Refilling Adapter Kit, W21.8 Connection for Carbonation Systems

CHF 47.95
+ CHF 14.49 Spedizione

CO2 Tank Refilling Adapter Kit, W21.8 Connection for Carbonation Systems

  • Marchio: Unbranded
Venduto da:

CO2 Tank Refilling Adapter Kit, W21.8 Connection for Carbonation Systems

  • Marchio: Unbranded

CHF 47.95

Economizzare CHF 26.05 (35%)

Prezzo di vendita consigliato

CHF 74.00
Disponibile
+ CHF 14.49 Spedizione

Politica di reso a 14 giorni

Venduto da:

CHF 47.95

Economizzare CHF 26.05 (35%)

Prezzo di vendita consigliato

CHF 74.00
Disponibile
+ CHF 14.49 Spedizione

Politica di reso a 14 giorni

Metodi di pagamento:

Descrizione

CO2 Tank Refilling Adapter Kit, W21.8 Connection for Carbonation Systems

Refilling Adapter Kit for W21.8 to CO2 Tank How It Works: 1. Chill the soda siphon cylinder in the freezer for 1 hour. 2. Attach the CGA320/W21.8 fitting to a commercial CO2 gas cylinder. 3. Remove the cap from the black adapter, then securely tighten the black adapter onto the CO2 cylinder. Ensure the knob on top of the black adapter is fully turned upward (in the highest position). Do not turn the knob downward — this would depress the 6 mm valve pin and close the valve, preventing CO2 flow. 4. For large CO2 cylinders: invert or lay the cylinder horizontally. Note that some large cylinders do not include a dip tube (siphon tube). 5. Slowly open the valve on the large CO2 cylinder. Opening too quickly or too far may trigger the safety valve and stop gas flow. Listen for steady airflow to confirm proper operation. 6. After approximately 15–20 seconds, the cylinder is fully filled. 7. Close the valve on the large CO2 cylinder. 8. Open the bleed screw to release any residual gas. 9. Unscrew the adapter from the CO2 cylinder. Important Notes: 1. If liquid CO2 remains in the cylinder, invert the CO2 tank during refilling — some tanks lack an internal dip tube. 2. The cylinder must be empty before refilling. Pre-chilled cartridges fill more completely. 3. Open the large cylinder’s valve very slowly when filling to avoid triggering the safety valve (6 mm pin). 4. This adapter is not compatible with RPV (Residual Pressure Valve) systems. Check your tank before ordering. If your tank has an RPV valve, select the “RPV Pushing Adapter” option. Some RPV valves can be removed using a hex wrench — verify compatibility first.
  • ID Fruugo: 461703400-971962372
  • EAN: 9067048137632

Informazioni sulla sicurezza del prodotto

Si prega di consultare le informazioni sulla sicurezza del prodotto specifiche per questo prodotto descritte di seguito

Le seguenti informazioni sono fornite dal rivenditore terzo indipendente che vende questo prodotto.

Avvertenze di sicurezza: Please use the product correctly according to the product manual

Consegne e Resi

Spedito entro 3 giorni

  • STANDARD: CHF 14.49 - Consegna tra gio 19 febbraio 2026–mar 03 marzo 2026

Spedizione da Cina.

Facciamo del nostro meglio per assicurare che i prodotti che ordini vengano consegnati integralmente e secondo le tue indicazioni. Tuttavia, nel caso dovessi ricevere un ordine incompleto, oppure articoli differenti rispetto a quelli che hai ordinato, o se c'è qualche altro motivo per il quale non sei soddisfatto dell'ordine, puoi effettuare il reso dell'ordine, o qualsiasi prodotto incluso nell'ordine e ricevere un rimborso completo per gli articoli. Visualizza la politica di reso completa