Aluminum Alloy Access Door Cover Panel, 1000 x 1000 mm (40 x 40 in) Product highlights Size and fit: Large 1000 x 1000 mm (40 x 40 in) access panel designed for standard inspection openings for valves, electrical boxes, and ventilation outlets. Material and finish: Made from aluminum alloy with a plasticsprayed surface for a discreet, matte appearance that blends with surrounding surfaces. Ventilated shutter design: Builtin slatted shutter acts as a ventilation outlet while concealing the access opening. Removable panels and screens: Main hatch panel releases with a simple click. Internal screen inserts are removable individually for easy cleaning and maintenance. Preset mounting holes: Factorydrilled mounting holes allow fast installation using screws. The hatch opens to about 90 degrees to avoid obstruction during maintenance. Flexible installation: Can be embedded in wall, ceiling, or floor openings. Use adhesive or screws to secure the cover as required. Adhesive not included. Key benefits Simplifies maintenance: Clickrelease panel and removable internal screens make routine inspection and cleaning fast and toollight. Improves airflow without exposing components: Ventilated shutters provide an air outlet while keeping hardware concealed. Easy to install and service: Preset mounting holes and a 90degree opening angle reduce installation time and prevent interference during access. Clean, integrated look: Plasticsprayed surface minimizes visual contrast with surrounding finishes for a professional appearance. Typical applications Bathroom shower valve access: Install the panel over valve or service boxes to allow concealed access for repairs or adjustments. Electrical and network inspection hatch: Use in utility rooms or ceilings to provide service access to electrical boxes and network equipment while maintaining airflow. HVAC and ventilation access: Fit into ceiling or wall openings where a ventilated access hatch is needed for ducts, dampers, or service points. What is included and installation notes One aluminum alloy access door cover, size 1000 x 1000 mm (40 x 40 in), with removable internal screen sections. Mounting requires screws or construction adhesive, depending on the installation substrate. Adhesive is not included. Ensure correct alignment with the opening and secure with appropriate fasteners for the material being mounted to. Materials and performance Frame and panel: aluminum alloy for a balance of strength and light weight. Surface: plastic spray finish for a lowprofile, easytoclean surface. Operation: Hinged panel opens approximately 90 degrees for unobstructed maintenance access. Internal screens are individually removable. This access door cover provides a practical, discreet solution for inspection openings where ventilation and easy serviceability are required.