Automatic Melting Strapping Tool This rechargeable handheld strapping machine automatically tensions, welds, and cuts plastic straps for fast, secure packaging. Insert a PP or PE strap, press the tension button to tighten, then press the welding switch. The tool performs the weld and trims excess strap, completing each band quickly and reliably. Key benefits Fast and efficient: tensions, welds, and cuts automatically to reduce cycle time. Typical bundle operation can be completed in under one minute. Easy to use: degree of automation enables nonprofessionals to achieve consistent results with minimal training. Powerful and adjustable: large tightening force suitable for heavyduty packaging, with adjustable pull force from 0 to 3200 N. Lightweight and portable: unit plus battery weighs 6.6 lbs, making it easy to handle for extended use. Battery operated for field use: 4000 mAh rechargeable lithium battery recharges in about 90 minutes, supports roughly two hours of continuous work, and can strap approximately 250 to 350 belts per full charge. Battery lifetime is rated for up to 2000 charge cycles. Compatibility and performance Strap compatibility: accepts PP and PE straps 10 to 16 mm wide and 0.4 to 1.2 mm thick (approximately 0.01 to 0.04 inch). Tension control: manual knob lets the operator set the required pulling force from 0 to 3200 N for different loads and strap types. Operation sequence: insert strap, press tension button to tighten, then press welding switch for automatic weld and cut. Practical applications Timber bundling: secure packs of lumber for transport or storage; suitable for operators who need fast, repeatable bundling on site. Palletizing and warehouse packing: tighten and seal straps on pallet loads or stacked boxes to improve handling and reduce load shift. Construction and outdoor use: portable power and battery operation allow strapping of pipes, frames, or bundled materials where mains power is not available. What makes it stand out Fully automatic welding and cutting after tensioning simplifies the workflow and reduces manual finishing steps. Wide compatibility with common PP and PE strap sizes makes the tool versatile across industries. Adjustable tension and maximum pull force accommodate light to heavyduty applications while remaining easy to operate. This handheld electric strapping tool is designed for users who need a portable, reliable solution for fast and consistent plastic strap tensioning, welding, and cutting.