Product overview A compact 200 watt siren speaker designed for integration with vehicle siren systems. The unit is intended for use with external siren controllers and comes with two wires for connection. It cannot be powered on its own and must be connected to a compatible siren system. Key benefits Clear, loud warning output: 118 to 130 dB sound level for reliable audible presence in traffic and emergency situations. Simple integration: two preinstalled wires allow direct connection to a siren controller; no separate internal amplifier is included. Compact installation: slim profile fits behind grilles or inside push bumpers where space is limited. Durable construction: heavyduty corrosionresistant aluminum housing with a black finish for long service life in vehicle environments. Broad compatibility: works with 12 to 24 volt systems and with siren systems rated 100 to 200 watts. Important compatibility note This speaker has an impedance of 8 ohms. Ensure your original siren speaker has a resistance of 12V DC/8 Ohm before installation. Using this speaker on a 4 ohm system may cause reduced sound output or no sound at all. The speaker cannot be driven directly from a power source; it must be connected to a siren controller or compatible siren amplifier. Specifications Item Dimensions: 24.5 x 24 x 6.5 mm Item Weight: pounds Applicable Models: Universal Power Supply Voltage: 12 to 24 V Power: 200 W Impedance: 8 Ohm Sound Level: 118 130 dB Current: 2 A Compatible Models: 100 200 Watt Siren System Frequency Range: 400 to 4000 Hz Material and Finish: corrosionresistant heavyduty aluminum, black finish Package contents 1 x Siren Speaker Two wires preinstalled for connection to a siren controller Typical applications Emergency response vehicles: installation behind the grille or in a bumper for police cars, ambulances, and fire trucks requiring a compact, output speaker. Service and utility vehicles: use on tow trucks, roadside assistance vehicles, and municipal fleets to provide clear warning tones while maintaining a lowprofile installation. Offroad and recreational vehicles: mounting on ATVs and UTVs where space is limited but audible signaling is required. Installation notes Confirm system impedance: verify the existing siren system is compatible with an 8 ohm speaker and supports 100 to 200 watt output. Power connection: attach the two wires to the siren controller outputs per the controller manufacturer instructions. Do not attempt to power the unit directly without a controller. Mounting: the slim housing allows flexible placement behind grilles or within bumpers; ensure a secure, corrosion mounting location and proper wiring routing. This speaker provides a compact, durable option for replacing or upgrading vehicle siren output where an 8 ohm, 200 watt speaker is required.