Color: White Overview This portable solar panel kit includes two 200W monocrystalline panels designed for lightweight, lowprofile solar charging. Ultrathin laminate construction and multilayer sheet lamination improve panel performance and durability while keeping weight low for easy transport and installation. Key benefits Improved battery charging and longer service life: Multilayer sheet lamination enhances energy conversion stability and extends the usable life of the panels and connected batteries. Ultrathin and lightweight: Panels are approximately 5 mm thick and weigh 3800 g each, making them easy to carry and simple to stow on vehicles or in storage. Flexible mounting and wide compatibility: Six mounting holes per panel allow secure fixing to many surface types. Panels conform to slightly curved surfaces, suitable for RVs, boats, trailers, and tents. Weather tolerant and protected: IP67 protection level helps protect the panel body against dust and water ingress for reliable outdoor use. Readytoconnect system: Standard photovoltaic cable and MC4 connectors simplify connection to charge controllers, batteries, and inverter systems. Low loss and good heat dissipation: Designed to minimize performance loss under load and maintain stable operation across a wide temperature range. Performance and technical specifications (per panel) Maximum power (Pmax): 200W (single chip) Output error: +/3% Tolerance: +/5% Maximum system voltage: 700V DC Maximum system voltage: 16V24V Open circuit voltage (Voc): 19.2V36V Isc temperature coefficient: (010+/0.01)%/C Voc temperature coefficient: (0.38+/0.01)%/C Power supply temperature coefficient Voc: 0.47%/C Temperature operating range: 20 C to +80 C Connector type: MC4 Battery efficiency: 19.8% Weight: 3800 g Size: 1060*277*5 mm Standard test conditions: irradiance 1000 W/m2, temperature 25 C, AM=1.5 Package contents 2 x 200W solar panels 1 x alligator clip wire 1 x 40A controller 4 x connector 4 x carabiner 2 x 2in1 line 1 x extension cord Practical features Six predrilled mounting holes for secure attachment on flat or curved surfaces. MC4 compatible connectors for standard photovoltaic systems and easy integration with most charge controllers and inverter setups. Thin, lowprofile design reduces visual impact and enables nearflat installations on roofs, decks, and vehicle tops. Lightweight construction makes the panels suitable for temporary setups, transport, and seasonal use. Typical use scenarios RV and camper battery charging: Mount panels on an RV roof or secure to a luggage rack to keep house batteries charged while parked or traveling. Marine and boat use: Install on sailboats, yachts, or small craft to provide trickle or auxiliary charging for batteries during cruising and at anchor. Camping and offgrid power: Use at campsites, cabins, or remote cabins to run small appliances, charge phones and lights, and maintain battery banks with the included 40A controller. Installation and compatibility notes The panels include standard photovoltaic cable and MC4 connectors for straightforward connection to most charge controllers and battery systems. Use the six mounting holes to adapt to different surface types. The thin, flexible panel construction improves fit on gently curved surfaces. Review the listed maximum system voltages and Voc values to ensure compatibility with your existing inverter or charge controller specifications. This kit provides a compact, portable solar charging solution for outdoor recreation, marine applications, and small offgrid installations where low weight, thin profile, and easy mounting are priorities.