F50 Micro Hydro Generator A compact, lightweight micro hydro generator designed for reliable offgrid DC power. The F50 converts water pressure directly into output voltage without requiring a voltage regulator, making it suitable for small streams, ponds, and remote installations where simplicity and durability matter. Key benefits Adjustable voltage based on water pressure: Output voltage rises proportionally with circuit water pressure, eliminating the need for a separate voltage regulator in many applications. Stable performance: Built to handle regular use and varying environmental conditions, providing consistent operation for both and professional setups. Quiet operation: Solid structural design keeps mechanical noise low, measured at 55 dB or less, so it can be used in quiet environments such as cabins and campsites. Smooth, durable finish: The smooth surface improves weather resistance and appearance for outdoor installations. Easy installation: Compact and lightweight at 90 g, the F50 is simple to handle and quick to install in small waterways or remote sites. Important specifications Weight: 90 g 3.2 oz Color: Yellow Voltage options: 5 V, 12 V, 80 V (optional) Maximum output voltage: 80 V at 1.2 MPa Maximum output current: 220 mA at 12 V Line to line resistance: 10.5 +/ 0.5 ohm Insulation: 10 mOhm (DC100 tramegger) Maximum pressure closed outlet: 0.6 MPa Maximum pressure open outlet: 1.2 MPa Starting water pressure: 0.05 MPa Axial clearance: 0.2 1.0 mm Mechanical noise: <= 55 dB Generator life: >= 3000 h Package contents 1 x Micro Generator Performance note Output current depends on water pressure and wiring. Typical output under connection may be about 0150 mA, with a maximum rated output of 220 mA at 12 V. Actual voltage and current vary with water pressure. Typical applications Remote lighting and lowpower loads: Power LED lighting or small DC devices from a stream or pond for cabins and campsites. Sensor and telemetry systems: Provide continuous lowvoltage power to environmental sensors and monitoring equipment in offgrid locations. Emergency and backup power: Use in remote sites to supply small electronics or charge batteries when grid power is unavailable. Installation tips Mount the unit securely in flowing water where pressure is stable and within the specified operating range. Verify wiring polarity when connecting loads or batteries. Keep axial clearance within 0.2 to 1.0 mm for performance. The F50 micro hydro generator offers a straightforward, durable solution for converting water pressure into usable DC power in smallscale and remote installations.