Portable Wrist IP Camera Tester Models: IPC1800ADHPlus and IPC1800ADHCPlus Type: Monitoring Tester Overview A compact wristworn tester designed for camera installers and network technicians. Supports H.265 and H.264, 4K main stream testing, multiple HD coaxial formats, and provides onsite power and network diagnostics in a lightweight, wearable package. Key benefits Hands, portable design for quicker field work: wristworn form factor keeps the tester within easy reach during installs and repairs. Compact size and low weight improve mobility. Comprehensive video and signal support: tests H.265 and H.264 streams up to 4K. Compatible with upgraded coaxial HD standards including TVI8MP, CVI8MP, and AHD8MP. Onboard power for cameras: builtin 48V PoE output and 12V 3A power output let you power devices directly for testing and configuration. Fast network and cable diagnostics: integrated 10/100/1000M adaptive network port shows link status and data flow, and the network cable TDR test identifies cable faults on site. Advanced line tracing for wiring verification: enhanced digital line hunter with simultaneous line and sequencing testing available on IPC1800ADHCPlus to speed up cable identification and verification. Clear, responsive interface: 4inch 800x480 fullview capacitive touch screen with updated interface for straightforward operation. Core functions and compatibility Video codecs supported: H.265 and H.264 with 4K main stream test capability. Coaxial HD compatibility: upgraded support for coaxial HD 4.0, TVI8MP, CVI8MP, and AHD8MP. Power outputs: 48V PoE output and 12V 3A DC output for powering cameras during testing. Network diagnostics: 10/100/1000M adaptive RJ45 port with network status and throughput display, plus network cable TDR testing. Line hunter: digital line hunter with simultaneous line and sequencing testing present on IPC1800ADHCPlus model. User interface: capacitive touch operation with auto standby options from off to 5 through 30 minutes. Power and battery External power input: DC 12V 1A. Battery: builtin 7.4V polymer lithium battery, 2400mAh. Charging: 3 to 4 hours per full charge. Typical run time: approximately 8 hours of normal use on a single charge. Physical and environmental specifications Dimensions: 126 mm x 83 mm x 33 mm. Weight: approximately 0.32 kg. Display: 4inch 800 x 480 capacitive touch screen. Operating temperature: 10 degrees C to +50 degrees C. Operating humidity: 30 percent to 90 percent. Typical use scenarios Field camera installation: power a camera with PoE or 12V output, confirm video stream in H.265 or H.264, and verify resolution and format on the builtin screen before final mounting. Network troubleshooting: use the adaptive network port and flow display together with the cable TDR test to locate faulty runs and verify link quality at the camera endpoint. Coaxial system upgrades and validation: validate TVI8MP, CVI8MP, and AHD8MP camera signals during system upgrades, and use the tester to confirm proper sequencing and wiring when using the IPC1800ADHCPlus. What makes this tester stand out Wearable design for efficient hands testing. Broad codec and video format support including H.265 and 4K main stream. Onboard PoE and 12V power outputs to power devices without carrying extra adaptors. Builtin network and cable diagnostics plus enhanced line hunting on the IPC1800ADHCPlus model for faster fault identification. Included model notes IPC1800ADHPlus and IPC1800ADHCPlus share core video, power, and network functions. IPC1800ADHCPlus includes the enhanced digital line hunter with simultaneous line and sequencing testing. This tester is intended for professional use by camera installers and network technicians needing a compact, allinone tool for video verification, power delivery, and onsite network and cable diagnostics.