Motion sensor switch for LED lights Key benefits Automatic on off control based on detected motion, removing the need to manually operate lighting. Adjustable sensitivity, detection distance, and delay time let you fine tune performance for different locations and use cases. IP54 waterproof rating and support for outdoor LED fixtures make the switch suitable for both indoor and outdoor installations. Compatible with DC 12V LED systems up to 30W. Main features Sensor type: motion sensor switch with adjustable sensitivity; generally does not need adjustment for normal use. Lens: Fresnel lens for sensitivity and stable detection. Detection coverage: 180 degree detection without blind spots; supports 180 degree rotation in the horizontal direction and 180 degree rotation in the vertical direction for flexible installation angle. Detection distance: adjustable from 5 to 11 meters. Delay time: adjustable from 5 seconds to 8 minutes. Voltage and load: working voltage DC 12V, supports LED lights with a maximum power of 30W. Protection: IP54 waterproof rating suitable for sheltered outdoor use. Intended applications: can be used for home lighting, parking lots, garages, schools, corridors, commercial spaces, parks, and other indoor and outdoor LED lighting scenarios. Additional note: motion detector switch to improve conversion rates. Performance and compatibility Designed to work with low voltage DC 12V LED fixtures up to 30W. Confirm fixture voltage and power before installation. Fresnel lens and wide 180 degree detection angle provide reliable motion sensing across typical corridor, stairway, and outdoor approach layouts. Sensitivity, detection range, and delay time are all adjustable to match the behavior of occupants and the layout of the space. Practical use scenarios Residential porch or entry light: Automatically turn on an outdoor LED fixture when a person approaches, then turn off after the selected delay time. Garage or parking area: Activate lighting only when motion is detected to improve convenience and reduce time lights remain on. School or office corridor: Cover long corridors with wide angle detection and adjustable delay so lights respond to movement and turn off after spaces are vacated. Installation and operation tips Mount the sensor to allow clear line of sight over the area to be monitored and use the horizontal and vertical rotation to eliminate blind spots. Start with default sensitivity and detection range, then fine tune sensitivity and detection distance if the sensor is triggering too often or missing movement. Verify the LED fixture is DC 12V and does not exceed 30W before connecting. Specifications summary Working voltage: DC 12V Detection distance: adjustable 5 to 11 m Detection angle: 180 degree Delay time: adjustable 5 seconds to 8 minutes Protection rating: IP54 Maximum supported LED power: 30W Lens: Fresnel lens Adjustable installation angle: 180 degree horizontal and 180 degree vertical rotation This motion sensor switch delivers flexible, adjustable motion detection for low voltage LED lighting installations in a range of indoor and outdoor settings.