200W 24V 5blade Wind Turbine — Robust, efficient offgrid power Key benefits Reliable output generation for outdoor, energydemand applications. Rated power 200 W, peak 220 W, supports parallel operation for multiple devices. Lowwind start and improved lowspeed performance. Optimized 1.3 m nylon fiber blades and micronlevel surface flow guiding patterns enable startup at 2.0 m/s and increase output in medium and low winds. Durable, weatherresistant construction for harsh environments. Militarygrade diecast aluminum onepiece frame, nitrided hardened bearing seat, and axial impact resistance of 1200 N for longterm stability. Advanced protection and maintenance reduction. Electromagnetic braking with temperature feedback automatically reduces load under temperature and extends the service life of mechanical brakes by three times. Integrated overvoltage and overcurrent protection with automatic shutdown at extreme wind speeds up to 55 m/s. Performance highlights Generator efficiency: NdFeB threephase AC permanent magnet generator with power conversion rate greater than 93 percent. Smooth operation: vibration under 55 m/s wind less than 0.1 mm and about 70 percent lower jitter compared with similar models, reducing mechanical fatigue. Fast wind tracking: 360 degree automatic yaw system locks the windward angle in 0.3 seconds. Blade aerodynamic grooves reduce turbulence loss by about 15 percent and raise power generation in medium and low winds by about 22 percent. Operating temperature range from 40 to 80 C, maintaining integrity in extreme cold or heat. Typical daily output Average daily generation approximately 2.4 to 4.8 kWh, depending on local wind conditions. Technical specifications Power: 200 W Maximum power: 220 W Voltage: 24 V Starting wind speed: 2.0 m/s Rated wind speed: 11.5 m/s Safe wind speed: 55 m/s Blade diameter: 1.3 m Number of blades: 5 Blade material: nylon fiber Generator type: threephase AC permanent magnet generator Magnetic material: NdFeB Generator housing: diecast aluminum Braking method: electromagnetic with temperature feedback Wind direction adjustment: automatic yaw Working temperature: 40 to 80 C Axial impact resistance: 1200 N Applications Offgrid residences: Provide steady auxiliary power for lighting, battery charging, pumps, and other household systems where grid supply is limited or unavailable. Communication relay stations: Reliable, continuous power for remote telecom equipment, extending autonomy and reducing generator runtime. Offshore aquaculture platforms: Corrosionresistant construction and robust protection systems support power needs for aeration, monitoring, and control equipment in marine environments. What makes this turbine stand out Engineered blade design and surface micropatterns for lower starting thresholds and higher lowwind output. efficiency NdFeB generator for effective power conversion and stable output. Militarygrade mechanical construction and advanced electromagnetic protection reduce maintenance and extend operational life in severe conditions. Note Images are for reference only. Please refer to the actual product for final appearance and configuration.