Immobilizer Emulator for Motorcycles and Scooters. Compatible with motorcycles and scooters manufactured from 2006 to 2009. No programming required—simply connect the wires. Fully emulates the functionality of a standard immobilizer, including LED indicator operation on the instrument panel. Installation Steps (when replacing a standard immobilizer): 1. Remove the sealant from the original immobilizer housing. 2. Remove the PCB from the immobilizer and desolder the connected wires. 3. Connect the emulator according to the provided wiring diagram. 4. Place the emulator into the original immobilizer housing. Wire Color Coding: - Black (2 wires): Ground (GND) - Red: Battery positive (+12V) - Yellow: +12V - Gray: LED (+5V) - Blue: K-line (Immo-ECU connection) Note: Installation instructions are not included. Professional installation is strongly recommended. Please verify compatibility before purchase. Product updates may occur across production batches; minor variations in appearance or color may occur, but these do not affect functionality. Color: As shown in images Material: PCB Package Contents: 1 × Immobilizer Emulator Note: Other accessories or items shown in images are not included. Due to lighting conditions and screen settings, actual product color may vary slightly from images. Measurement tolerance: ±1–3 cm.