Highlight: The module supports high-level trigger, low-level trigger, switch control, and PWM control. It features dual-MOS parallel active output for lower internal resistance, higher current handling, and stronger power delivery. Continuous current rating is 10A at room temperature, with a maximum power capacity of 600W—suitable for most high-power applications. Wide input voltage range: DC 4V to 60V. Ideal for controlling high-power devices such as DC motors, lamps, LED lights, micro-pumps, and solenoid valves. When supplied with a PWM signal, it enables adjustable motor speed or lamp brightness control. Note: - Only one control signal may be used at a time; do not apply multiple signals simultaneously. - High-level trigger voltage range: DC 3.0V to 24V. MOS conducts within this range; below 0.6V (e.g., 0V–0.6V), MOS is off. Avoid input voltages between 0.6V and 3.0V, as partial conduction may cause overheating or MOS failure. - Low-level trigger voltage range: DC 0V to 0.6V. MOS conducts within this range; above 3.0V, MOS is off. Avoid input voltages between 0.6V and 3.0V for the same reason. Specifications: - Operating voltage: DC 4V–60V - Trigger options: High-level trigger (DC 3.0V–24V), low-level trigger (DC 0V–0.6V), switch control, compatible with MCU GPIO, PLC interfaces, DC power supplies, and PWM signals (frequency range: 0–2.5 kHz) - Output capacity: DC 4V–60V, continuous current up to 10A at room temperature (600W); up to 15A with auxiliary cooling - Switching life: Unlimited - Type: Voltage regulator - Maximum power dissipation: 600W - Operating temperature: -40°C to +85°C - Color: Blue - Housing material: ABS - Dimensions: 46.5 × 29.2 mm - Package includes: 1 × High-power module