It is a useful tool for configuring your satellite dish. This device connects between the parabolic antenna and its receiver, allowing you to locate the satellite without using the signal meter on your TV. Features: - . - Equipped with H/V and 22 kHz indicators. Indicator lights verify whether your receiver is set to Horizontal or Vertical polarity and whether the 22 kHz tone is on or off. - Green H/V light indicates Vertical Polarity. Red H/V light indicates Horizontal Polarity. Red 22 kHz light indicates 22 kHz is ON. - When aligning a C-band dish, avoid placing the meter directly in front of the dish to prevent full-scale readings. - When connecting to an LNBF with gain higher than 65 dB, insert a 5 dB attenuator between the meter and the LNBF. - If an attenuator is not available, use a coaxial cable 60 feet or longer between the meter and the LNBF. - If the meter needle fluctuates, the sensitivity may be too high. - Adjust the S.A. level on the back of the meter by accessing the adjustment point marked under the label. - Exercise caution when adjusting to avoid damage. Specifications: - Item type: Satellite Signal Finder Meter - Model: GSF-9502 - Material: Plastic + Metal - Main Color: Black + Silver - Size: 79 × 61 × 35 mm / 3.1 × 2.4 × 1.4 in (Approx.) - Frequency Range: 950–2150 MHz - Power Supply: 13–18 V DC - Quantity: 1 Set Note: - 1 cm = 10 mm = 0.39 in - Please allow for a measurement tolerance of up to 1 cm. - Due to variations between monitors, the displayed image may not reflect the exact color of the item. Package includes: - 1 × Satellite Signal Finder - 1 × User Manual