nsert 2 AA batteries (batteries not included) Unlock the safety/protective cover to the down position Press the sealing machine to preheat for 5-7 seconds The surface of the bag required for flattening is sealed along the edge Place the plastic sealer on the bag and press down firmly When pressed, move moderately from one end to the other Finally loosen the protective cover, and then move it back to the up position specification Material: high-quality ABS material, resistant to high and low temperatures. Non-toxic and durable size:9.7cm/3cm Color: pink/white. Battery: 1.5V, 2 AA batteries, only alkaline batteries (not included) can be used. User Manual 1, The machine won/t generate heat by itself after being installed / / batteries. Press it for 3-5 seconds so that heat will come up gradually. 2, Please use / / batteries. Don/t mix up the polarity of the batteries. Make sure the batteries are properly installed. Otherwise, the machine is not able to generate heat. 3, Long press the machine for 3 to 5 seconds after the batteries are properly installed. Then the machine will start generating heat. 4, For a thick plastic bag, please move it slowly between the machine to let the heat spread evenly for a better sealing performance. 5, No need to remove the batteries. After use, simply move the hook between the machine to block contacts of the two metal parts.