Orthodontic Dental Bonding Kit, Light Cure Adhesive System, Tools 2026

CHF 28.95
+ CHF 9.99 Versand

Orthodontic Dental Bonding Kit, Light Cure Adhesive System, Tools 2026

  • Marke: unbrand
Verkauft von:

Orthodontic Dental Bonding Kit, Light Cure Adhesive System, Tools 2026

  • Marke: unbrand

CHF 28.95

Bespaar CHF 9.00 (23%)

UVP

CHF 37.95
Auf Lager
+ CHF 9.99 Versand

14-Tage-Rückgabepolitik

Verkauft von:

CHF 28.95

Bespaar CHF 9.00 (23%)

UVP

CHF 37.95
Auf Lager
+ CHF 9.99 Versand

14-Tage-Rückgabepolitik

Zahlungsmethoden:

Beschreibung

Orthodontic Dental Bonding Kit, Light Cure Adhesive System, Tools 2026

Feature 1Mainly used for bonding various dental orthodontic accessories. 2Easy to use, less waste, independent operation and other advantages. 3Has high clinical bond strength, high efficiency and convneient to use. 4Wonderful new - generation enamel adhesive resin, complete accessory. 5There are 2 different types available, you can choose by your needs.Condition: NewItem Type:Orthodontic Dental AdhesiveOptional Type:Large Set,Small SetMaterial: PlasticService Life: 18 MonthsStorage Condition: Keep below 25 (do not freeze)Suitable for: All kinds of dental orthodontic attachment adhesionMain Technical Performance Index: Curing time not more than 3000 adhesive shear strength MPa>17.2Usage:1. Tooth preparation: cleaning the enamel surface of the teeth, remove dirt on the tooth surface, rinse the teeth thoroughly with water, isolate the teeth, and blow dry the tooth surface with oil-free and moisture-free air gun.2. Acid-eroded tooth surface: apply the acid-eroded agent on the tooth surface, rinse thoroughly with water after 50-60 seconds, blow dry, and the tooth surface after acid-eroded is chalky. If there is no chalky appearance, the acid etching time is prolonged.3. Primer: brush a thin layer of liquid on the etch surface of the teeth with a bristle brush, and brush a thin layer of liquid on the bonding surface of the brackets with another bristle brush (wet is enough).4. Bonding: apply a small amount of paste with the mixing rod to the adhesive surface of the grooves coated with liquid agent to form a thin layer.Glue the bracket and the tooth surface immediately after applying the paste.Adjust the position of the bracket within 20 seconds, and press slightly for 5-10 seconds to prevent the bracket from sliding.Remove excess liquid and paste after 40-60 seconds.After curing for 5 minutes, orthodontic operation can be performed.wang-edit-text{font-family:'Arial' !important;}.wang-edit-text table {border-top: 1px solid #000;border-left: 1px solid #000;}.wang-edit-text table td,.wang-edit-text table th {border-bottom: 1px solid #000;border-right: 1px solid #000;padding: 3px 5px;}.wang-edit-text table th {text-align: center;}Package List3 x Paste 3.5g1 x Etching Agent 2.5ml1 x Liquid Agent 8ml20 x Brush Head1 x Needles3 x Mixing PenNoteKeep below 25 (do not freeze)
  • Marke: unbrand
  • Kategorie: Zahnzement
  • Größe: Small Set
  • Fruugo-ID: 501175164-1028403137

Produktsicherheitsinformationen

Bitte beachten Sie die unten aufgeführten spezifischen Produktsicherheitsinformationen für dieses Produkt

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Produktsicherheitsetiketten

CE Mark
Sicherheitswarnungen: Please read the instructions before use

Lieferung

Versand innerhalb von 24 Stunden

  • STANDARD: CHF 9.99 - Lieferung zwischen Do. 23 Juli 2026–Do. 30 Juli 2026

Versand von China.

Rückgabe

Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihrer Spezifikationen an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten.

Vollständige Rückgaberichtlinie ansehen

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Hersteller:
Es folgen die Kontaktdaten für den Hersteller des jeweiligen Produkts, das auf Fruugo verkauft wird.

  • Shenzhen Zhaojinfa Technology Co., Ltd
  • Shenzhen Zhaojinfa Technology Co., Ltd
  • Shangshui Garden, Building 146, Unit 106
  • 146 Jihua Street, Lihu Community, Longgang District
  • Shenzhen
  • CN
  • 518000
  • [email protected]
  • 15920388234
  • https://www.ShenzhenZhaojinfaTechnology.com

Verantwortliche Person in der EU:
Es folgen die Kontaktinformationen für die verantwortliche Person in der EU. Die verantwortliche Person ist der benannte Wirtschaftsteilnehmer mit Sitz in der EU und verantwortlich für die Compliance-Verpflichtungen in Verbindung mit dem jeweiligen Produkt, das in die Europäische Union verkauft wird.

  • MJCM SARL
  • MJCM SARL
  • 78 avenue des Champs Elysees Bureau 326
  • Paris
  • France
  • 75008
  • [email protected]
  • 0033 767213611