Direct replacement 24V LED light board designed specifically compatible with Flashcompatible withge Adventurer 5M, 5M Pro and AD5X 3D printers, ideal compatible with upgrading or replacing a failed light. Note: the regular 5M lacks a lighting control port, so you must use an external switch or fully power off the printer to cut power to the light. Low‑power, high‑brightness LED board rated at 24V, 0.2A and about 4.8W, delivering efficient illumination without adding noticeable load to the printer. Features two 8.5 mm mounting holes so you can securely fix the light strip to the AD5M Pro front panel or mount it on dual side panels of the 5M using magnets. Extended 23 cm/9.06 in light bar integrates 7 premium lamp beads that output stable, constant‑current cold white light, ensuring even, comcompatible withtable chamber illumination during long prints. Includes a 71.5 cm/28.15 in connection cable to easily plug into the PCB control board compatible with quick, plug‑and‑play power. Improves chamber visibility so you can clearly observe the hotend extruder assembly, 0.4 mm brass nozzle and printed layers in real time, helping with bed leveling, print inspection and troubleshooting. Also makes filament loading, unloading and replacing standard 1.75 mm materials faster and more accurate. Supports DIY modifications with printable mounting brackets; refer to pictures or search Thingiverse compatible with "5M Pro Light Board Bracket" or "5M AD5X Light Board Bracket" STL files. Terminals on both ends allow series connection of two boards if you want a brighter AD5M environment, and two small magnets are included. Color: As Shown Material: ABS Package Contents: 1*LED light strip kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.