Isolated USB-C to TTL UART Programmer Industrial 3.3V with Accessories

This module is an isolated USB-TTL. The interface used is the mainstream TYPE-C interface. Insert the TYPE-C data cable to connect to the computer. The signal sampling is a dedicated signal isolation chip, which makes the output more stable. The power indicator light and the humidity module are more clear.<br> USB power supply: USB 5V, TYPE-C interface<br> TTL terminal power supply: 3.3V, with power indicator<br> TTL end signal level: 3.3V (TTL end only supports 3.3V power supply and 3.3V TTL signal, not 5V!)<br> Communication protocol: pure hardware equipment, not restricted by protocol<br> Baud rate: up to 25600bps<br> Isolation level: power isolation and signal isolation, isolation voltage AC300oVrms, static ±8KV<br> Temperature range: -40℃-80℃<br> Support system: support hot swap, support win98/CE/2000/2003/2008/XP/WIN7/WIN8/WIN10/VISTA/-<br> LINUX/MAC OSX system, USB interface is hot-swappable<br> Product size: 23mm x 23mm x 7mm<br> Interface<br> 3.3V: 3.3V output positive<br> RX: UART serial port input<br> TX: UART serial port output<br> GND: negative pole of power output<br> TYPE-C: USB interface to computer<br> Note:<br> The 3.3V pin on the TTL end is not the output voltage of the module. This pin needs to supply power to the module. There is a power indicator light. The power indicator light must be on to work.<br> Colour:Black<br> Material:PCB+electronic components<br> Package Contents:<br> 1 x USB to TTL module with adapter board<br> 1 x 4P cable<br> 2 x screws(M3 x 5)<br> 2 x M3 nuts<br> (Cables/screws/nuts are all randomly colored, don't accept the specified color)<br> Only the above package content, other products are not included.<br> Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.