This Kyoshin Elle Hand Sewing Needle Set includes five blunt, round-pointed needles crafted from nickel-plated steel, specifically designed for hand-stitching thick materials. These 49mm needles are ideal for sewing leather items such as wallets, belts, bags, saddles, and harnesses. Their robust build and smooth surface allow for clean, controlled stitching with minimal thread wear, especially when used with pre-punched holes or a stitching awl.While best suited for leathercraft, these needles can also be used on canvas, denim, and other durable fabrics where holes are pre-made or easily opened. The blunt tip helps prevent accidental damage to the material, making them suitable for both experienced artisans and beginners who want to maintain structural integrity during hand-stitching.Product Data:• Material: Nickel-plated steel• Needle Length: 49mm• Needle Thickness: 1.1mm• Point Type: Blunt, round-pointed• Quantity: 5 needles per set• Weight: Approximately 10 grams• Compatibility: Use with pre-punched holes or a stitching awl• Ideal For: Hand-sewn wallets, bags, belts, harnesses, saddles, canvas, and denimTo prepare your thread, cut approximately 8 to 10 feet (two full arm’s lengths) and taper each end using a knife. Gently scrape the end on a flat surface to fray the fibres without cutting through, then shape them into a fine point. Apply beeswax while rubbing the tapered ends against a smooth surface such as a metal hook to reinforce the thread and reduce fraying during stitching.To thread the needle, insert the tapered end through the eye, leaving a short tail. Use the needle tip to pierce the thread near the end and form a loop. Pull the loose end through and slide it toward the eye, locking it in place. For saddle stitching, repeat this process for a second needle, and wax the locked ends to prevent them from slipping while sewing.After use, store the needles in a dry location and keep them in a rigid case to prevent bending. Although the blunt tips reduce the risk of accidental piercing, they can still cause injury if mishandled. If exposed to moisture, dry thoroughly and apply a light coating of oil to protect the steel and prevent rust.