DTECH IOT9031 RS232485422 To TCP 3 In 1 Serial Server, CN Plug 1. Input voltage: DC 9V-70V 2. Input current: external power supply 1A 3. Power supply mode: wide voltage or POE power supply mode 4. Packing list: server x1, 12V 1A power supply x1, manual x1, foot pad x4 5. Size: about 9 x 7 x 2.15cm Ethernet Standard: 1. Number of ports: one RJ45 standard network port 2. Speed: support 10100M, full-duplexhalf-duplex adaptive Ethernet interface, compatible with 802.3 protocol 3. Network protocol: IP, TCP, DHCP, RTU, HTTPD Client 4. Buffer: send: 6K bytes, receive: 4K bytes Serial port: 1. Number of ports: two 2. Interface standard: RS-232, RS-485, RS-422 3. Data bits: 5, 6, 7, 8 4. Stop bit: 1, 2 5. Check digit: None, Even, Odd, Space, Mark 6. Baud rate: 300-921.6kbps 7. Cache: Receive: 800 bytes Software: 1. Virtual serial port: NetModuleConfig (windows2000 or higher (3264 bit)) 2. Configuration method: PC setting software Features: 1. Connect the server device through the Intel network signal of the computer, transmit the remote RS232485422 communication function, the transmission distance is more than 1200m, and each converter can connect 32 RS232485422 interface devices 2. Using a high-speed processor chip, the signal is automatically sent and received without delay 3. Modbus RTUTCP bidirectional transparent transmission 4. Support baud rate 300-921.6kbps data transmission, higher rate, faster data transmission 5. Built-in Ethernet media transport layer (MAC) and physical layer (PHY), support 10100M, full-duplexhalf-duplex adaptive Ethernet interface, compatible with network 802.3 protocol 6. DHCP automatically obtains IP address, DNS domain name access 7. Powerful POE power supply function, pay attention to choose POE switches with 45 and 78 power supply modes, each POE switch port can be connected to a server 8. External power supply 9-70V wide voltage, support a wide range of integrated circuits, three powe