2x Natural Nylon PA66 M8 x 500mm Threaded Rods, Plastic Studding + 4 Nuts

BP1: 2x Threaded Rods. 4 nuts included. Material: Nylon Polyamide 66 (PA66). Type: Fully Threaded Plastic Rod. Length: 500mm. Diameter: 8mm. Pitch: 1.25mm. SKU: 972.. BP2: M8 PA66 gives a broader plastic thread for medium spacer runs and cut-to-length threaded stock.. BP3: Wear-resistant nylon handles repeated nut fitting better than softer plastics, while remaining a non-metallic component.. BP4: The 500 mm length provides usable stock for trimming into multiple custom sections with suitable cutting tools.. BP5: Use for spacing runs, guide positions and alignment bars where a plastic M8 threaded rod is preferred.. || PRODUCT DESCRIPTION SUMMARY: These M8 x 500 mm natural PA66 threaded rods are supplied as 2 fully threaded plastic rods. PA66, also called nylon polyamide 66, is a tough engineering plastic with useful wear resistance and a low-friction surface for nut fitting in light assemblies. This size suits spacing runs, guide positions and cut-to-length threaded sections, especially where a non-metallic threaded bar is easier to trim, position or identify than steel. The headless full-thread form lets compatible M8 nuts be positioned along the rod, or the rod can be cut carefully to shorter sections. PA66 can absorb a small amount of moisture, so check thread fit, tightening and the working environment before final use. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M8 x 500mm. Colour_Ref: Natural. Material_Ref: Nylon / Polyamide 66. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 500 x 8 x 8. || Additional Specifications: Pitch_MM: 1.25. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Material: Nylon Polyamide 66, Head/Drive Type: Fully Threaded Rod, size: M8 x 500, D: 8 mm, Pitch: 1.25 mm, L: 500 mm