BP1: 2x threaded rods. 4 nuts included. Material: Nylon Polyamide 66 / PA66. Colour: Natural. Size: M5 x 200 mm. Diameter: 5mm. Pitch: 0.8mm. SKU: 969.. BP2: PA66 offers a tougher feel than softer plastics, useful for short studs and compact spacers that may be adjusted during fitting.. BP3: Moisture note — PA66 can change very slightly with absorbed moisture, so allow for the working environment when fitting.. BP4: Short headless form fits into compact panels, small housings and close spacing layouts without excess rod length.. BP5: Use for short M5 studs, compact threaded spacers and small assemblies where nuts need a little more contact than M4, with careful tightening and checks for plastic-thread suitability.. || PRODUCT DESCRIPTION SUMMARY: These M5 x 200 mm natural PA66 threaded rods are supplied as 2 fully threaded plastic rods. PA66, also called nylon polyamide 66, is a tough engineering plastic with useful wear resistance and good low-friction behaviour for nut fitting in light assemblies. This size is suited to short M5 studs, compact threaded spacers and small assemblies where nuts need a little more contact than M4 where a lighter non-metal rod is preferred. Nylon can absorb some moisture, so check thread fit and dimensional tolerance in damp or changing environments. Cut with suitable tools, avoid over-tightening the plastic thread and confirm material suitability before final use. Supplied with 4 nuts.. || Please see the technical image illustration for size references. All measurements are in millimetres/millimeters. || Product Details: Size_Ref: M5 x 200mm. Colour_Ref: Natural. Material_Ref: Nylon / Polyamide 66. Type_Ref: Threaded Rods. Quantity_Ref: 2. || Dimensions (L x W x D mm): 200 x 5 x 5. || Additional Specifications: Pitch_MM: 0.8. Washer_Dimension: Nut_Dimension: Bolt_Dimension: Stock Code: CR-Rod-07018-PA66Material: Nylon Polyamide 66Material Reference: PA66Head/Drive Type: Fully Threaded Rodsize: M5 x 200D: 5 mmPitch: 0.8 mmL: 200 mm