220V AC Axial Fan 150mm 150FZY2-D, 330 m3/h 2800 RPM 30W, Welder Cooling 150x160x60mm

30W Ventilation Motor for 220V Systems - 330 m3 per hour airflow, 2800 rpm, 65 dBA. Key benefits: - Efficient low-power operation: runs at 220V and consumes only 0.16A while delivering 30W of drive power, reducing electrical load compared with larger motors. - Consistent airflow and speed: delivers 330 m3 per hour at a stable 2800 rpm for reliable ventilation and circulation. - Quiet operation: rated noise level of 65 dBA for reduced audible disturbance in occupied spaces. - Ready for capacitor start and run: designed to work with a 1.0 uF capacitor rated at 500V to ensure dependable starting and stable performance. - Designed for standard mains: built for 50Hz power supplies to match common regional electrical standards. Performance and compatibility: - Working voltage: 220V AC, frequency: 50Hz, current: 0.16A, power: 30W. - Air volume: 330 m3 per hour and rotational speed: 2800 rpm. - Capacitance requirement: 1.0 uF at 500V. - Noise level: 65 dBA measured at normal operating conditions. How this product solves common problems: - Improves ventilation where natural airflow is insufficient by providing a steady 330 m3 per hour exchange rate. - Low current draw limits impact on lighting and other circuits, preventing overloads on marginal wiring. - Quiet operation reduces background noise so ventilation can run without creating distraction. Practical applications: - Bathroom or small room exhaust fan to remove moisture and odors with steady airflow. - Range hood or kitchen ventilation for small cooking areas where moderate airflow and low noise are required. - Equipment or enclosure cooling for electronics, small motors, or compact workspaces that need continuous air circulation. Installation and compatibility notes: - Intended for use on 220V 50Hz mains; verify local supply matches these specifications before installation. - Requires a 1.0 uF 500V capacitor for proper starting and operation; confirm capacitor rating and wiring configuration with installer or technician. - Check mechanical mounting and electrical connections for compatibility with your existing fan housing or system prior to purchase and installation. This ventilation motor provides reliable, low-noise airflow for a range of small ventilation and cooling needs while operating on standard 220V 50Hz power.