Digital Power Energy Meter 10A AC Multifunction Voltage Current Tester with Backlight

FeaturesElectrical parameter measurement: Digital power factor multimeter is used for electrical parameter measurement functions, including voltage, current, active power, electrical energy, frequency, power factorEnergy reset: The energy can be reset via the keyPower-off data storage: Store data when power offBacklight function: The digital voltmeter turns on or off the backlight by short pressing the button. The backlight has a memory function that stores the on or off state when the power is off.Screen display: KWH tester is equipped with a large-screen LCD, which displays six parameters at the same time. Direct reading can also be used to adjust the data directlyApplication: The digital voltmeter is compatible with indoor use. The external load shall not exceed the rated power. The wiring sequence cannot be wrong.SpecificationWorking voltage: 80～260VACTest voltage: 80～260VACCurrent: 10ARated power: 10A/2300WWorking frequency: 45-65HzMeasurement accuracy: 1.0 levelSize: 9*5*2.5cm/3.5*2*1inWeight: 85g/3ozAppearance and Key functionI.Display InterfaceDisplay interface is large-screen LCD, it displays six parameters at the same time.II.Display format1. Power: test range: 0~2300W, Starting measure power: 0.2W＜10W display format:1.00~9.99W＜100W display format:10.0~99.9W＜1000W display format:100~999W≥1000W display format:1.00~2.30kW2. Energy: test range: 0~999kWh＜1kWh display format:0~999Wh＜10kWh display format:1.00~9.99kWh≥10kWh display format: 10~999kWh3. Voltage: test range: 80~260VDisplay format: 80~260V4. Current: test range: 0~10A,Starting measure current: 0.001ADisplay format: 0.000~10.00A5. Frequency: test range: 45~65HzDisplay format: 45~65Hz6. Power factor: test range: 0~1PFDisplay format: 0.00~1.00PFReset energy stepsStep1: Long press the key for 5 seconds until the energy value flashes, then release the key.Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state.Step3: If there is no operation on the key within 5 seconds, the energy value is not cleared and will exit the reset state.Package list1 * Digital Meter