Professional Electric Nail Drill for Acrylic Nails with Variable Speed Control and Foot Pedal

Professional electric nail drill machine designed for manicure and pedicure use with a portable handpiece and optional foot pedal for salon and athome nail care. Key benefits Precise speed control for filing, shaping, and polishing natural nails and enhancements. Hands operation option using the pedal switch for continuous work and greater control. Forward and reverse rotation for left and right handed use and versatile technique support. Compact main unit and removable handpiece for easy setup and storage. Main features and performance Connection: 5pin plug for the portable grinding head handpiece and a FOOT S w socket for the pedal switch. Function modes: HAND for manual pushbutton operation, FOOT for pedal control. Rotation directions: FWD for clockwise and REV for counterclockwise. Speed control: Variable speed knob from minimum to maximum; adjust smoothly to match the task. Power and motor specifications: Rated voltage range: 100120 V 60 Hz or 220240 V 50 Hz Rated power input: 18 W or 32 W Output rated voltage: DC 0 to 12 V or 18 V Handpiece working voltage: DC 0 to 12 V or 18 V Rated current: 1.5 A or 1.8 A Rated speed: 0 to 20000 RPM or 30000 RPM Quick installation and setup Plug the handpiece 5pin connector into the OUTPUT socket on the main panel. Plug the pedal switch into the FOOT S w socket if using the pedal. Insert and secure the appropriate drill bit in the handpiece. Turn the speed control knob fully left to the MIN position before powering on. Connect the main unit to the power source following the rated voltage instructions. Operation tips Select HAND mode to start the handpiece with the function switch and control speed using the knob. Select FOOT mode and press the pedal to run when using the foot switch. Gradually increase speed by turning the speed control to the right. Always reduce the handpiece to the lowest speed before changing rotation direction. Adjust speed to a reasonable level for the chosen bit and procedure to avoid damage. After use, power down and place the grinding head on the of the main panel. Practical applications and scenarios Salon manicure: Use HAND mode for detailed cuticle and surface work and switch to FOOT mode for longer filing sessions to reduce hand fatigue. Athome nail maintenance: Smooth out gel or acrylic enhancements and perform gentle natural nail shaping with adjustable speed control. Pedicure and large surface work: Use higher speeds for efficient removal of product and lower speeds for finishing and polishing. What to expect A versatile electric nail drill system that supports both button and pedal control, with adjustable speed and reversible rotation to match a variety of nail techniques and user preferences. Clear operational guidance for safe handling, setup, and shutdown to promote consistent performance over repeated use. Safety and handling reminders Always set the speed to the minimum before switching rotation direction or turning off the unit. Secure drill bits properly before operation. Keep the handpiece on the main panel when not in use.