Caulk Strip 2 Pack Green 10.5ft Waterproof Self Adhesive PVC Caulking Tape for Bathroom Kitchen Wall Sealing

PVC SelfAdhesive Caulk Strip 3.2 m (10.5 ft) 38 mm (1.5 inch) width Green Package: 2 caulk strips What it does and why you need it Creates a neat, watertight seal in corners and gaps without traditional caulking tools or messy tubes. Covers damaged corners, uneven paint lines, and small gaps along backsplashes, baseboards, and floors for a cleaner finish. Durable PVC construction resists water, corrosion, acids and alkalis, making it suitable for wet and use areas. Key features Material: PVC that is soft, flexible and long lasting. Special crease and linear design: Center crease and flexible profile allow the strip to bend and follow corners or curves for a tight fit. Selfadhesive backing: performance adhesive sticks to angles and smooth surfaces to form a reliable seal. Size: Each strip set totals 3.2 m (10.5 ft) length, 38 mm (1.5 inch) width. Color: Green Package: 2 pieces per pack Performance and compatibility Adheres to tile, marble, glass, painted wood and other flat, smooth surfaces. Waterproof and corrosionresistant for use in kitchens, bathrooms and laundry areas. Soft and flexible to act as an alternative to wood trim on baseboards and floor edges. Simple installation Prepare the surface: clean and dry. Remove any existing silicone or old caulking. Optional: warm the adhesive with a hair dryer before applying for improved stickiness. Peel and press the strip into place. Firmly press along the entire length. Recommended installation temperature: above 25 Celsius degrees for adhesion. Allow 8 to 10 hours after installation before exposing to heavy use or water. Typical applications Kitchen backsplash: seal the joint between countertop and wall to prevent moisture seepage and hide uneven grout or paint lines. Bathroom corners: seal shower and tub edges to reduce water intrusion and cover damaged corner finishes. Baseboards and floor edges: use as a quick wood trim alternative to cover gaps and protect edges from wear. Notes Ensure surfaces are clean and dry prior to application. Heat the adhesive briefly with a hair dryer for better bond if needed. Wait 8 to 10 hours after installation before exposing to water or heavy wear.