2Pcs 0.7mm Back Probe Test Pins for Multimeter, Insulation‑Piercing Banana Plug Probes Set

CHF 16.95
+ CHF 2.99 Versand

2Pcs 0.7mm Back Probe Test Pins for Multimeter, Insulation‑Piercing Banana Plug Probes Set

Verkauft von:

CHF 16.95

Bespaar CHF 8.00 (32%)

UVP

CHF 24.95
Auf Lager
+ CHF 2.99 Versand

14-Tage-Rückgabepolitik

Zahlungsmethoden:

  • Marke: Unbranded

Beschreibung

2Pcs 0.7mm Back Probe Test Pins for Multimeter, Insulation‑Piercing Banana Plug Probes Set

2piece backprobe test pins for multimeters and test leads. Each probe features a 0.7 mm wirepiercing needle and a banana socket plug connection. These destructive piercing probes are designed to make direct electrical contact through insulation when stripping is impractical. Key benefits Make reliable contact without stripping insulation: the 0.7 mm piercing needle accesses conductors through the jacket for quick measurements. Compatible with standard bananasocket multimeter leads: plugs into most test leads and banana jacks for easy integration into existing test setups. Quick and repeatable connections: ideal for troubleshooting or spot checks where access is limited. Supplied as a pair: two probes allow simultaneous differential measurements or a spare on hand. What this product does Function: backprobe multimeter test pins that pierce insulation to reach the conductor and transfer the signal to a bananasocket connection. Intended use: temporary, diagnostic contacts. These are destructive piercing probes, so use when permanent insulation integrity is not required. Specifications Quantity: 2 pieces Needle diameter: 0.7 mm Connection: banana socket plug Type: wirepiercing, destructive backprobe Practical applications Automotive wiring diagnostics: check voltage, continuity, and signal presence on harness wires without cutting or fully stripping insulation. Electronics and prototyping: access small signal wires or harnesses when probe tips cannot reach exposed conductors. Field maintenance and troubleshooting: perform quick checks on power and control cables where access is limited or removal of insulation is not feasible. Usage notes These are piercing probes that intentionally breach insulation. Use with care to avoid unintended short circuits or further wire damage. Not intended as a permanent connection. Remove after testing and or reinsulate the wire as required. Pack contents Two backprobe multimeter test pins, 0.7 mm wirepiercing needles with banana socket plug connections.
  • Fruugo-ID: 519985401-1058608069
  • EAN: 6291595685466

Lieferung

Versand innerhalb von 7 Tagen

  • STANDARD: CHF 2.99 - Lieferung zwischen Mo. 31 August 2026–Di. 08 September 2026

Versand von China.

Rückgabe

Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihrer Spezifikationen an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten.

Vollständige Rückgaberichtlinie ansehen

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Hersteller:
Es folgen die Kontaktdaten für den Hersteller des jeweiligen Produkts, das auf Fruugo verkauft wird.

  • Shenzhen Hengdan Electronic Commerce Co., Ltd.
  • Shenzhen Hengdan Electronic Commerce Co., Ltd.
  • Tairan 4th Road No.113,Tairan Technology Park,Building 213,4th Floor,4B32R
  • Futian District,Shatou Subdistrict,Tianan Community
  • Shenzhen
  • CN
  • 518000
  • [email protected]
  • 8617363858868

Verantwortliche Person in der EU:
Es folgen die Kontaktinformationen für die verantwortliche Person in der EU. Die verantwortliche Person ist der benannte Wirtschaftsteilnehmer mit Sitz in der EU und verantwortlich für die Compliance-Verpflichtungen in Verbindung mit dem jeweiligen Produkt, das in die Europäische Union verkauft wird.

  • Sea&Mew Consulting GmbH
  • Sea&Mew Consulting GmbH
  • Mittenhuber Strasse 4
  • Neumarkt
  • DE
  • 92318
  • [email protected]
  • 4915224685061