2Pcs 0.7mm Back Probe Test Pins for Multimeter, Insulation‑Piercing Banana Plug Probes Set

CHF 16.95
+ CHF 2.99 Spedizione

2Pcs 0.7mm Back Probe Test Pins for Multimeter, Insulation‑Piercing Banana Plug Probes Set

Venduto da:

CHF 16.95

Economizzare CHF 8.00 (32%)

Prezzo di vendita consigliato

CHF 24.95
Disponibile
+ CHF 2.99 Spedizione

Politica di reso a 14 giorni

Metodi di pagamento:

  • Marchio: Unbranded

Descrizione

2Pcs 0.7mm Back Probe Test Pins for Multimeter, Insulation‑Piercing Banana Plug Probes Set

2piece backprobe test pins for multimeters and test leads. Each probe features a 0.7 mm wirepiercing needle and a banana socket plug connection. These destructive piercing probes are designed to make direct electrical contact through insulation when stripping is impractical. Key benefits Make reliable contact without stripping insulation: the 0.7 mm piercing needle accesses conductors through the jacket for quick measurements. Compatible with standard bananasocket multimeter leads: plugs into most test leads and banana jacks for easy integration into existing test setups. Quick and repeatable connections: ideal for troubleshooting or spot checks where access is limited. Supplied as a pair: two probes allow simultaneous differential measurements or a spare on hand. What this product does Function: backprobe multimeter test pins that pierce insulation to reach the conductor and transfer the signal to a bananasocket connection. Intended use: temporary, diagnostic contacts. These are destructive piercing probes, so use when permanent insulation integrity is not required. Specifications Quantity: 2 pieces Needle diameter: 0.7 mm Connection: banana socket plug Type: wirepiercing, destructive backprobe Practical applications Automotive wiring diagnostics: check voltage, continuity, and signal presence on harness wires without cutting or fully stripping insulation. Electronics and prototyping: access small signal wires or harnesses when probe tips cannot reach exposed conductors. Field maintenance and troubleshooting: perform quick checks on power and control cables where access is limited or removal of insulation is not feasible. Usage notes These are piercing probes that intentionally breach insulation. Use with care to avoid unintended short circuits or further wire damage. Not intended as a permanent connection. Remove after testing and or reinsulate the wire as required. Pack contents Two backprobe multimeter test pins, 0.7 mm wirepiercing needles with banana socket plug connections.
  • ID Fruugo: 519985401-1058608069
  • EAN: 6291595685466

Consegna

Spedito entro 7 giorni

  • STANDARD: CHF 2.99 - Consegna tra lun 31 agosto 2026–mar 08 settembre 2026

Spedizione da Cina.

Resi

Facciamo del nostro meglio per assicurare che i prodotti che ordini vengano consegnati integralmente e secondo le tue indicazioni. Tuttavia, nel caso dovessi ricevere un ordine incompleto, oppure articoli differenti rispetto a quelli che hai ordinato, o se c'è qualche altro motivo per il quale non sei soddisfatto dell'ordine, puoi effettuare il reso dell'ordine, o qualsiasi prodotto incluso nell'ordine e ricevere un rimborso completo per gli articoli.

Visualizza la politica di reso completa

Dettagli sulla conformità del prodotto

Si prega di consultare le informazioni di conformità specifiche per questo prodotto descritte di seguito.

Le seguenti informazioni sono fornite dal rivenditore terzo indipendente che vende questo prodotto.

Produttore:
Le seguenti informazioni sono i dati di contatto del produttore del prodotto rilevante venduto su Fruugo.

  • Shenzhen Hengdan Electronic Commerce Co., Ltd.
  • Shenzhen Hengdan Electronic Commerce Co., Ltd.
  • Tairan 4th Road No.113,Tairan Technology Park,Building 213,4th Floor,4B32R
  • Futian District,Shatou Subdistrict,Tianan Community
  • Shenzhen
  • CN
  • 518000
  • [email protected]
  • 8617363858868

Persona responsabile nell'UE:
Le seguenti informazioni sono informazioni dei contatto della persona responsabile nell'UE. La persona responsabile è l'operatore economico designato con sede nell'UE, responsabile degli obblighi di conformità relativi al prodotto in questione venduto nell'Unione Europea.

  • Sea&Mew Consulting GmbH
  • Sea&Mew Consulting GmbH
  • Mittenhuber Strasse 4
  • Neumarkt
  • DE
  • 92318
  • [email protected]
  • 4915224685061