Dental Bonding Kit for Orthodontic Light Cure Adhesive System Large Set-inst

Features1、Mainly used for bonding various dental orthodontic accessories.2、Easy to use, less waste, independent operation and other advantages.3、Has high clinical bond strength, high efficiency and convneient to use.4、Wonderful new - generation enamel adhesive resin, complete accessory.5、There are 2 different types available, you can choose by your needs.SpecificationCondition: NewItem Type: Orthodontic Dental AdhesiveOptional Type: Large Set, Small SetMaterial: PlasticService Life: 18 MonthsStorage Condition: Keep below 25℃ (do not freeze)Suitable for: All kinds of dental orthodontic attachment adhesionMain Technical Performance Index: Curing time not more than 3000 adhesive shear strength MPa>17.2Usage:1. Tooth preparation: cleaning the enamel surface of the teeth, remove dirt on the tooth surface, rinse the teeth thoroughly with water, isolate the teeth, and blow dry the tooth surface with oil-free and moisture-free air gun.2. Acid-eroded tooth surface: apply the acid-eroded agent on the tooth surface, rinse thoroughly with water after 50-60 seconds, blow dry, and the tooth surface after acid-eroded is chalky. If there is no chalky appearance, the acid etching time is prolonged.3. Primer: brush a thin layer of liquid on the etch surface of the teeth with a bristle brush, and brush a thin layer of liquid on the bonding surface of the brackets with another bristle brush (wet is enough).4. Bonding: apply a small amount of paste with the mixing rod to the adhesive surface of the grooves coated with liquid agent to form a thin layer.Glue the bracket and the tooth surface immediately after applying the paste.Adjust the position of the bracket within 20 seconds, and press slightly for 5-10 seconds to prevent the bracket from sliding.Remove excess liquid and paste after 40-60 seconds.After curing for 5 minutes, orthodontic operation can be performedPackage List3 x Paste 3.5g1 x Etching Agent 2.5ml1 x Liquid Agent 8ml20 x Brush Head1 x Needles3 x Mixing Pen