S Type Load Cell 1 Ton IP66 Waterproof Force Sensor for Hopper Scale and Automation System

1pc S Type Load Cell Force Sensor 5 kg to 5000 kg IP65 and IP66 Waterproof Weighing Sensor for Hopper Scale and Automation System Color: 1T Overview This S type load cell is a singlepiece force sensor designed for precise weighing and force measurement in hopper scales and industrial automation systems. It delivers stable mV/V output, repeatability, and robust protection against dust and water for reliable performance in industrial environments. Key benefits Accurate signal output for reliable weighing and force measurement in process control and batching applications. overload capacity and stable repeatability reduce downtime and recalibration needs. Waterproof protection and wide operating temperature make the sensor suitable for harsh industrial conditions. Compact S type form factor enables straightforward integration with hopper scales, test rigs, and automation equipment. Main features Rated load range: 5 kg to 5000 kg (0 kg to 5 T indicated). Sensitivity: 1.0 to 2.0 mV/V with an accuracy tolerance of +/0.05 mV/V. Nonlinearity: +/0.03 to +/0.05 percent F.S. Repeatability: +/0.03 percent F.S. Creep: +/0.03 percent F.S. Lag error: +/0.03 percent F.S. Zero temperature coefficient: +/0.05 percent F.S per 10 C. Sensitivity temperature coefficient: +/0.05 percent F.S per 10 C. Input resistance: 380 +/ 30 ohms. Output resistance: 350 +/ 5 ohms. Insulation resistance: 2000 Mohm at 100 VDC. Excitation voltage: 5 to 12 V. Safe overload: 150 percent F.S. Protection class: IP65 and IP66 rated for dust and water ingress. No concern chemicals in construction. Compatibility and function Designed for use with common weighing transmitters, junction boxes, and data acquisition systems that accept a mV/V load cell signal and support the specified input and output resistance ranges. Suitable for direct installation in hopper scales and feed systems, or as a force sensor in automation and testing setups. Practical applications Hopper scale weighing: Install under hoppers or bins to measure batch weights and control material flow in bulk handling and feeding systems. Automation and process control: Integrate into production lines for force feedback, load monitoring, and automated batching control. Test and measurement rigs: Use in small machine test stands or fixture systems to measure static loads up to 5 T with repeatable accuracy. What to expect in operation Stable output over repeated cycles with low hysteresis and creep. Tolerance to overloads up to 150 percent of full scale for shortterm events. Consistent performance across a wide ambient temperature range of 20 to +70 C. Protection against dust and water ingress when installed per IP65 or IP66 requirements. Notes for integration Match excitation voltage within 5 to 12 V to the receiving electronics specification. Verify instrument input resistance compatibility with the sensor input resistance of 380 +/ 30 ohms. Ensure mounting and mechanical interface align with the S type load cell form factor and rated load for safe operation. This sensor provides a reliable, industrialgrade solution for weighing and force measurement tasks where waterproofing, repeatability, and overload tolerance are required.