Programmable DDS Signal Generator Module with Sine and Square Wave Output compatible with Microprocessor Applications via Serial Interface

The AD9833 is a low-power programmable wavecompatible withm generator capable of producing sine, triangle, and square wave outputs. It is suitable compatible with applications such as wavecompatible withm detection, signal generation, and time-domain reflectometry (TDR), where precise and stable frequency and phase control are required. The device is software-programmable and requires no external components.The frequency register is 28 bits wide. With a 25 MHz reference clock, it provides 0.1 Hz frequency resolution. When clocked at 1 MHz, the resolution improves to approximately 0.004 Hz.It features a standard serial interface compatible with various microprocessors and DSPs. The serial interface supports clock frequencies up to 40 MHz and uses an external serial clock compatible with data input.Key specifications:- Digitally programmable frequency and phase - Power consumption: 12.65 mW at 3 V - Output frequency range: 0 MHz to 12.5 MHz - Reference clock frequency: up to 25 MHz - Supply voltage: 2.3 V to 5.5 V - Integrated power-down (sleep) mode to reduce power consumption - Operating temperature range: –40 °C to +105 °C - Output voltage range: 38 mV to 650 mV - Input voltage ranges: high-level input 1.7–2.8 V; low-level input 0.5–0.7 V - Input capacitance: 3 pF Package includes: - 1 × DDS module - 1 × pin header