Esp32 Devkitc Nrf24L01 Pa Lna Wireless Module Kit 2.4G Electronic Bluetooth Wifi

Product Introduction This kit consists of an for development board and an NRF24L01+PA+LNA 2.4GHz wireless module. It is primarily used for embedded microcontroller development, learning 2.4G RF communication principles, electronics hobby training, university teaching experiments, and personal project research and development. Important Notes for Use 1. This product is an electronics learning development kit and is only suitable for personal technical research, teaching training, and embedded project development scenarios. 2. If you require accompanying learning programs, development firmware, wiring tutorials, and related materials, please contact customer service at any time to request them free of charge. 3. Users must consciously abide by national radio and related industry regulations and use this equipment only for technical experiments and research in a closed indoor environment. Kit Configuration List • for ESP32-DevKitC Development Board × 1 unit • NRF24L01+PA+LNA 2.4GHz Wireless Module × 2 units • Dedicated Matching Adapter Board × 1 unit Power-On and Debugging Procedure 1. Connect the kit to a 5V power supply using a Type-C data cable; 2. Switch the toggle switch on the adapter board from the off position to the on position; 3. Press the RST reset button on the for 4. The device will automatically complete initialization and can then be used for development, debugging, and communication experiments. Disclaimer This product is purely for electronic development and learning purposes and is intended for technical learning and teaching experiments only. The user is solely responsible for any consequences arising from modifications or use outside the specified scope. This store assumes no liability whatsoever.