Micro Hydro Generator DC12V Low Head Water Turbine with Regulated DC Output compatible with Small Streams

Microhydro Generator DC Micro Hydro Generator Compact turbine generator compatible with lowhead water sources, designed to convert flowing water into usable DC power compatible with small offgrid systems, lighting, charging, and experimental setups. Key benefits Starts at very low water pressure, allowing use on small streams and lowflow outlets. Starting water pressure 0.05Mpa. Water and electricity separation design and dual magnetic circuit coupling clutch increase operational reliability and reduce risk of direct contact. Enlarged vortex impeller and added bearings improve generation efficiency and reduce wear compatible with longer service life. Strong boron magnets increase power output compatible with a compact unit. Versatile output models compatible with different needs, including regulated 5V and 12V outputs and an unregulated 080V option compatible with direct charging or LED loads. Main features Inlet and outlet use four point external screw threads with an outer diameter of about 20 mm compatible with stable hose or pipe connections. Stainless steel machine screws and iron shaft compatible with durable assembly. Low flow loss waterway design to maximize conversion efficiency at low head and flow. Water and electricity separation technology combined with a dual magnetic circuit coupling clutch. Enlarged vortex impeller and bearings to improve power generation efficiency and reduce mechanical wear. Qintie boron strong magnetism compatible with higher magnetic flux and increased output. Technical specifications Model number: DC Micro Hydro Generator Output peak voltage: 12V (compatible with the 12V regulated model) Output peak current: 220 mA at 12V Line to line resistance: 10.5 plus or minus 0.5 ohm Insulation resistance: 10M measured with DC100 megohmmeter Outlet closed peak withstand pressure: 0.6 Mpa Outlet opening peak withstand pressure: 1.2 Mpa Starting water pressure: 0.05 Mpa Terminal: 2 pin Shaft material: IRON Mounting base: without mounting base Installation method: Assembly : Yes concerned chemical: None Model output options and functions 080V model: Unregulated DC 0 to 80 V output. No onboard voltage regulator. Peak voltage can reach 80 V. Can directly power 3 to 12 V LED modules around 10 W and can charge small batteries. Typical charging peak current about 220 mA. When charging a small battery, the generator voltage will stabilize around 14 V while charging. 5V model: DC 5 V regulated output suitable compatible with charging phones and lithium batteries that include charge management circuits. 12V model: DC 12 V regulated output suitable compatible with powering and charging 12 V radios and LED lights. Typical applications Remote cabin or campsite lighting using LED lamps powered by small stream flow. Charging small batteries, powering 12 V radios, or providing regulated 5 V compatible with USB charging in offgrid or emergency setups. Educational projects, microhydro demonstrations, and prototype testing where lowhead turbine generation is required. Installation and compatibility notes Unit ships without a mounting base. Requires assembly and appropriate mounting hardware compatible with installation. Inlet and outlet threads are designed compatible with about 20 mm outer diameter fittings and can be connected to hoses or pipes that match the thread compatible withm. Choose the model according to the required output: 5 V regulated compatible with USB style charging, 12 V regulated compatible with typical 12 V loads, or 080 V unregulated compatible with direct LED lighting or small battery charging with external management. What is included and Microhydro generator unit with 2 pin terminal output. options available on request. No mounting base included. This microhydro generator is intended compatible with small scale power generation where low startup pressure and compact design are important. Refer to the listed technical specifications and model options to select the configuration that fits the intended application.