Wall-mounted black bicycle bracket, suitable for wall-mounted bicycle brackets, Fonepro.

Color: Black Shipped Quantity: 1 piece Product Size: 26*9.5*4.5 cm Weight: 30KG, suitable for all kinds of mountain bikes, road bikes, folding bikes, etc. This bicycle hook is made of solid materials, good steel, thick enough, and weighs 600 grams; the overall design is good, fixed with 4 screws, evenly distributed on the main body and the top, left side of the main body Designed with stiffeners, it will not be bent by the bicycle. The right fender is designed to be smaller so that the front wheel will not be obstructed when placing and removing the vehicle. The front end of the hook has a large arc and the hook angle is appropriate. The front wheel does not disassemble. The long rubber sleeve protects the rim tape. , The main body and the hook are welded in two parts, with high strength and durability. Installation and use method: Choose the location to place the bicycle in the room and the wall must be a load-bearing wall. Place this product at a suitable height and position to ensure that the bicycle is upright and height and location. Drill holes on the wall according to the positions of the 4 screw holes of this product. Note that the thickness of the drill bit must match the expansion sleeve, well, once the hole is drilled, it will feel less when inserted into the expansion sleeve. tight. After inserting 4 expansion sleeves, fix the product to the wall with 4 screws. If the installation technique is limited or the wall quality is not high, it is recommended to regularly check the firmness of the screws. Install How to use: Choose a location in the room to place the bicycle, and the wall must be a load-bearing wall. Place this product at an appropriate height and position to ensure that the bicycle is upright and reaches the appropriate height and location. Drill holes on the wall according to the positions of the 4 screw holes of this product. Note that the thickness of the drill bit must match the expansion sleeve. Fortunately, after the hole is drilled, it feels tight when inserting the expansion sleeve. After inserting 4 expansion sleeves, fix the product to the wall with 4 screws. If the installation technology is limited or the wall quality is not high, it is recommended to regularly check whether the screws are securely fastened. Install the user Method: Choose a location in the room to place the bicycles, and the wall must be a load-bearing wall. Place this product at the appropriate height and position to ensure that the bicycle is upright and reaches the appropriate height and position. . Drill holes on the wall according to the positions of the 4 screw holes of this product. Note that the thickness of the drill bit must match the expansion sleeve. Well, after the hole is drilled, it feels tight when inserting the expansion sleeve. Insert 4 After the expansion sleeve, fix the product to the wall with 4 screws. If the installation technology is limited or the wall quality is not high, it is recommended to regularly check whether the screws are firmly fixed. Fixed means that the hook position is welded and cannot be moved up and down. The advantage is that it is convenient to pick up and store the car.