Brass Transition Strip 100cm Door Threshold Trim with Brushed Finish, Smooth Floor Edge Protection

Solid brass transition strip for covering floor seams and protecting edges. Length 100 cm (39 3/8 in). Size shown: 10 x 16 mm (0.39 in x 0.63 in). Color: W X H. Brushed brass finish. Load capacity 250 kg / 550 lbs. Can be customized and cut to length. Key benefits Smooth transitions: covers gaps between floors on the same plane to create a continuous, tripresistant surface. Edge protection: shields tile and flooring edges from chipping and wear at doorways and thresholds. Durable performance: solid brass construction with a brushed finish resists wear in foot traffic areas; supports up to 250 kg / 550 lbs. Easy installation and : installs with adhesive only, no drilling required; can be cut to the exact length you need. Low maintenance: simple to clean and suitable for everyday use. Specifications Material: metal brass Finish: brushed brass Length: 100 cm (39 3/8 in) Shown size: 10 x 16 mm (0.39 in x 0.63 in) Load: 250 kg / 550 lbs Can be customized: Yes Can be cut: Yes Glue not included Available sizes (mm and approximate inches) 4 x 6 mm (0.16 in x 0.24 in) 5 x 7 mm (0.20 in x 0.28 in) 5 x 12 mm (0.20 in x 0.47 in) 5 x 15 mm (0.20 in x 0.59 in) 5 x 20 mm (0.20 in x 0.79 in) 6 x 5.5 mm (0.24 in x 0.22 in) 8 x 5 mm (0.31 in x 0.20 in) 10 x 12 mm (0.39 in x 0.47 in) 10 x 16 mm (0.39 in x 0.63 in) 12 x 6.3 mm (0.47 in x 0.25 in) 15 x 7 mm (0.59 in x 0.28 in) 15 x 10 mm (0.59 in x 0.39 in) 20 x 7 mm (0.79 in x 0.28 in) 22 x 10 mm (0.87 in x 0.39 in) 35 x 10 mm (1.38 in x 0.39 in) Typical applications Doorway transition between tile and hardwood where a lowprofile seam cover is needed to prevent trips. Entry threshold to protect flooring edges from cart or luggage traffic and reduce edge chipping. Hallways or room transitions in homes, assisted living, or offices to create a smooth passage for wheelchairs, strollers, and walkers. Installation tips Clean and dry the mounting surface before applying adhesive. Apply a suitable construction adhesive or superglue along the strip base and press into place. No screws or drilling are required. Trim to exact length with a finetooth hacksaw or metal cutter. File any sharp edges after cutting. Allow adhesive to cure according to the glue manufacturer instructions. Glue is not included. Why choose this transition strip Solid brass construction for long service life and reliable load capacity. Multiple size options to fit different flooring thicknesses and gap widths. Simple adhesive installation and easy onsite cutting for a fast, professional finish. Designed to reduce trip hazards and protect flooring edges without altering the floor structure.