2 Pcs 1/4 BSP Stainless Steel Misting Nozzle 0.8mm Fine Spray for Cooling, Cleaning, Garden Irrigation

stainless steel atomization nozzles for reliable misting and spraying. Designed for durability and precise performance in garden, greenhouse, and light industrial applications. Key benefits Durable construction: Made from stainless steel for corrosion resistance, rust prevention, and long service life. Clogresistant inlet: Each nozzle includes a stainless steel filter at the inlet to reduce debris and improve reliability. Controlled spray pattern: Normal spray angle is about 60 degrees for focused atomization and predictable coverage. Versatile flow options: Choose hole diameters from 0.2 mm to 1.0 mm to match required flow rates and droplet sizes. Broad compatibility: Standard 1/4 inch BSPT thread fits common plumbing and misting systems. Wide temperature range: Operates between 32 to 212 F (0 to 100 C) for indoor and outdoor use. Compact and lightweight: Total size 16 x 31.5 mm (0.63 x 1.24 in) hex width x total length, weight 50 g. Package contents 2 atomization nozzles Performance and coverage In calm conditions the nozzle can project mist to a height of approximately 1 to 3 m, with an effective coverage area of about 1 to 2 square feet per nozzle. Spray angle is approximately 60 degrees. Typical applications Greenhouse humidification and climate control: Maintain even humidity for plants with adjustable orifice sizes. Outdoor cooling and misting systems: Use on patios, terraces, and courtyards for evaporative cooling. Small fountains and atomization systems, agricultural irrigation, dust suppression, lubrication, and light equipment washing. Important notes Hole diameter options: 0.2 mm to 1.0 mm. Please confirm the nozzle size you need before . Thread specification: 1/4 inch BSPT. Slight size variations may occur due to manual measurement. Color may appear different under varying lighting; please allow minor differences. This stainless steel atomization nozzle provides a durable, adaptable solution for misting, cooling, humidifying, and light spray tasks where consistent performance and corrosion resistance are required.