400mm 16 Inch Manual Impulse Heat Sealer, Portable Hand Pressure Food Film Sealing Machine for Mylar Bags, PP Plastic Bags, Blue

No Preheating Required: This sealing machine is compact, portable, and easy to use. No preheating time is needed, heat control can be adjusted, various bags and films can be sealed, and a timer controls sealing. Fast Heat Dissipation: The sealing machine features bottom heat dissipation for fast cooling and no heat buildup during long-term operation. Easy to Use: Just connect the power cord to the socket and adjust the heating time according to the sealing thickness of the material. Place the plastic bag on the sealing machine, press the handle, and the LED indicator will light up; the machine controls the heating time by itself. When the LED indicator goes out, the power is automatically disconnected. Release the handle after 1-2 seconds to complete the seal. Suitable Sealing Size: Sealing machine size: 53 x 8.5 x 8.5cm. Maximum sealing size: 400mm (L) x 8mm (W). Wide Range of Use: The manual pulse sealing machine can seal plastic bags, polypropylene bags, PP plastic, bubble bags, PVC, polyester, kraft paper bags, and tea bags. Used for sealing food, gifts, office supplies, carrying bags, and other products. Description: The hand-operated impulse sealers are portable machines used to seal plastic bags, polypropylene bags, bubble bags, PVC, polyester, kraft paper bags, and tea bags. Seals a wide variety of bags and films; adjustable heat controls; timer for sealing control; compact and portable; seals all kinds of plastic; no warm-up time needed. Material: Plastic Max Sealing LandW: 400mm(L) x 8mm(W) Dimension(L x W x H): About 53 x 8.5 x 8.5cm Using Instructions: 1. Just connect the power cable to your socket and adjust the heating time according to the sealing thickness of the material. Put the plastic bag on it, then press the handle; the LED indicator light will turn on, and the machine will control the heating time itself. When the LED indicator light is off, the power automatically disconnects. Release the handle after 1-2 seconds, and sealing is finished. 2. The LED indicator light is on only when the machine is sealing; it is not on if you just connect it to the socket. 3. If damage appears during sealing, the heating time is too long; shorten the heating time by rotating the timer knob anticlockwise. 4. If insecure sealing appears, the heating time is too short; extend the heating time by rotating the timer knob clockwise. 5. If the plastic bag sticks to the machine, the cooling time is not long enough. Please extend the cooling time after the LED light is off and hold longer before releasing the handle. 6. If the heating time is adjusted, do not make any changes while sealing or continuous sealing. Package Included: 1 x Impulse Sealer