Control Unit 8Servos2-Chain 8-Channel Servo Cascade Unit STM32G031G8U6 Controller UART Communication Interface

Status indication Red indicator: DC power interface status indicator (lights up when the interface voltage is higher than 8.5V) Green indicator: HY2.0-4P interface undervoltage status indicator (lights up when the interface voltage is lower than 4.5V) Applications Multi-servo control Robot joint drive Smart toys STEAM education Specification MCU: STM32G031G8U6 Configurable IO Channels: 8, supports operating modes: servo control, digital input/output, ADC input, RGB LED, PWM mode IO Channel Interface: 8 x 2.54-3P Communication Interface: UART @ Chain Series Communication Protocol (IN / OUT) DC Power Input Interface: Input voltage: DC 9 ~ 24V, spec: 5.5 x 2.1mm, polarity: center positive, outer negative Step-Down Chip: SY8303AIC Power Output: DC 5V, max 3A (shared by all onboard loads) Current Detection Circuit: INA199A1DCKR, paired with a 10mΩ sampling resistor Indicator: Red DC input monitoring indicator, green undervoltage monitoring indicator Standby Power Consumption: DC [email protected] Operating Power Consumption: DC [email protected] (8 servo loads) Color: White Material: plastic Package Contents: 1 x Unit 8Servos2-Chain 1 x HY2.0-4P Grove Cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.