Adjustable PWM DC Motor Speed Controller 12V 24V 48V Forward Reverse Remote

Function Introduction 1. Soft Start Time Setting: Adjustable range 000-100 (0-10 seconds), default value 1 second 2. Soft Stop Time Setting: Adjustable range 000-100 (0-10 seconds), default value 1 second For Function 3, Function 4 and Function 5, values with more than 3 digits will not display the thousands place, and the thousands place will flash on the setting interface 3. Maximum Speed Scale Setting: Adjustable range 000-9990, default value 100 4. Speed Lower Limit Setting: Adjustable range 000-9980, default value 0 5. Speed Upper Limit Setting: Adjustable range 000-9980, default value 100 6. Speed Adjustment Increment Setting: Adjustable values include 001, 002, 005, 010, 015, 020, 025, 050, 100. Each press of the increase or decrease button adjusts the speed by the selected increment 7. Power-on Start Mode: Mode 1: Motor does not start when powered on; Mode 2: Motor starts automatically when powered on. Default mode is Mode 1 8. Total Running Time Setting: Adjustable range 0~99:59:59. Setting to all 0 disables timing function. Default value is 0 For Function 9, Function 0 and Function A, long press the setting button for 2 seconds to switch between hour, minute and second units 9. Forward Rotation Time Setting: Adjustable range 0~99:59:59, default value 10 seconds 10. Stop Time Setting: Adjustable range 0~99:59:59, default value 10 seconds 11. Reverse Rotation Time Setting: Adjustable range 0~99:59:59, default value 10 seconds 12. Manual/Automatic Mode Selection: Mode 1: Manual mode, Function 8, 9, 10, 11 are disabled; Mode 2: Automatic mode, Function 8, 9, 10, 11 are enabled Parameters Input voltage: DC 6-55V Maximum current: 20A Display method: LCD color screen Rotation direction: Bidirectional Speed regulation method: Button and knob Wireless remote control: Yes Supported load: compatible with DC brushless motor Installation method: Embedded Wiring type: Fence type terminal Product net weight: 95g + 25g Product dimensions: 77mm width × 57mm height × 38mm thickness Opening dimensions: 72mm width × 52mm height Material: Plastic Wiring Instructions Input voltage must be within DC 6-55V, and the specific voltage must match the rated voltage of the connected motor Input power positive terminal Power negative terminal Motor positive terminal Motor negative terminal Remote Control Pairing Long press the setting button, then power on the device, then press any key on the remote control once. The backlight flashes twice to indicate successful pairing Factory Reset Enter the setting interface, press and hold the setting button for 6 seconds. The backlight flashes twice to indicate successful restoration to factory settings Appearance may vary between different product batches, which does not affect normal use Package Contents 1 × Speed Controller 1 × Remote control