2.5-Inch Snap-On Dust Adapter

A dedicated dust extraction solution for the DWE7485 table saw, this adapter features a rigid 2.5-inch (6.4 cm) inlet port aligned precisely with the saw’s built-in collector. Its overall size is approx. 17.1 × 7 × 15.2 cm (6.75 × 2.75 × 6 in), and it is manufactured from impact-resistant PLA polymer — chosen for balanced strength, low weight, and repeatability in repeated snap-fit cycles. It interfaces directly with standard vacuum hoses (typically 32–35 mm inner diameter), delivering effective suction transfer without step-down reducers or sealants. Because it captures dust at origin, it supports cleaner blade visibility, reduced maintenance frequency, and lower ambient particulate levels — aligning with UK Health and Safety Executive (HSE) guidance on woodworking dust control where feasible engineering controls are prioritised.