11PCS Universal Clutch Alignment Tool Kit Complete Vehicle Auto Repair Tool for Centering of Clutch Disc

CHF 69.00
+ CHF 8.49 Versand

11PCS Universal Clutch Alignment Tool Kit Complete Vehicle Auto Repair Tool for Centering of Clutch Disc

  • Marke: Unbranded
Verkauft von:

11PCS Universal Clutch Alignment Tool Kit Complete Vehicle Auto Repair Tool for Centering of Clutch Disc

  • Marke: Unbranded
UPE: CHF 139.00
Preis: CHF 69.00
Sie sparen: CHF 70.00 (50%)
Verkauft von:
CHF 69.00
+ CHF 8.49 Versand

Auf Lager

Wir akzeptieren die folgenden Zahlungsmethoden

Beschreibung

Features: 1.Features: This is an universal alignment kit for centering of the clutch disc, stable performance and high reliability. 2.Main Function: Alignment repair tool is used for fast accurate alignment of flywheel pilot hole and clutch drive plate when repair clutch. 3.Package Information: This clutch alignment tool kit comes fully equipped with 8 spigot adaptors, 3 expanding mandrels, complete and practical. 4.Stable Characteristics: Professional manufacturing, high accuracy, stable characteristics and high reliability, dependable for use. 5.Quality Material: Universal clutch alignment tool is made of excellent quality metal material, anti rust and durable, sturdy and high strength. Specification: Item Type: Universal Clutch Alignment Tool Kit Material: Metal Package Include: 8 x Spigot Adaptors: 0.47in, 0.55in, 0.59in, 0.63in, 0.67in, 0.7in, 0.75in, 0.78in (12mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm) 3 x Expanding Mandrels: 0.59in-0.75in, 0.78in-1.05in,0.9in-1.42in (15 -19 mm, 20 -26.6 mm, 23 -36 mm) Operation Steps: Step 1: First, insert the tool into the clutch disc. Make sure the clutch is facing the correct direction. The tool should stick all the way through the spines on the disc. Step 2: Then place the clutch on the flywheel, and engage the alignment tool into the pilot bushing or bearing in the center of the crankshaft. Push the clutch tight to the flywheel. Step 3: With the clutch on the flywheel, install the pressure plate to the flywheel and start the bolts. Step 4: Wiggle the alignment tool to make sure it is fully engaged and seated in the pilot bushing and bearing. Tighten the pressure plate bolts in a criss cross pattern and then torque to spec. Tip: Before insert the tool into the clutch disc, please choose a suitable adaptor size to fit pilot bearing and connect with expanding mandrel. The clutch alignment tool stays in the clutch until you are ready to install the transmission. While the pressure place should hold the clutch from moving, dont take the risk of pulling the tool out too soon. Once the transmission is ready to install, pull the tool out, and slide the transmission into place.
  • Fruugo-ID: 319163626-709095926
  • EAN: 9368102609745

Lieferung und Rückgaben

Versand innerhalb von 3 Tagen

  • STANDARD: CHF 8.49 - Lieferung zwischen Fr. 24 Oktober 2025–Fr. 31 Oktober 2025

Versand von China.

Wir tun unser Bestes, um dafür zu sorgen, dass die von Ihnen bestellten Produkte vollständig und gemäß Ihrer Spezifikationen an Sie geliefert werden. Wenn Sie allerdings eine unvollständige Bestellung oder Artikel erhalten, die sich von den bestellten unterscheiden, oder es einen anderen Grund gibt, warum Sie mit Ihrer Bestellung nicht zufrieden sind, können Sie die gesamte Bestellung oder einzelne darin enthaltenen Produkte zurücksenden und eine vollständige Rückerstattung für die Artikel erhalten. Vollständige Rückgaberichtlinie ansehen

Details zur Produktkonformität

Bitte beachten Sie die unten aufgeführten Konformitätsinformationen zu diesem Produkt.

Die folgenden Informationen werden vom unabhängigen Drittanbieter bereitgestellt, der dieses Produkt verkauft.

Hersteller:
Es folgen die Kontaktdaten für den Hersteller des jeweiligen Produkts, das auf Fruugo verkauft wird.

  • 91440300MA5HDL2A4K
  • SHEN ZHEN SHI LAI LI ZHU BAO SHI PIN MAO YI YOU XIAN GONG SI
  • Room B, 21F, Block A, Jingang Huating, 4009 Baoan Avenue, Yantian Community, Xixiang Street, Baoan District, Shenzhen
  • Shenzhen
  • CN
  • 518102
  • 939301410@qq.com
  • 15625700418

Verantwortliche Person in der EU:
Es folgen die Kontaktinformationen für die verantwortliche Person in der EU. Die verantwortliche Person ist der benannte Wirtschaftsteilnehmer mit Sitz in der EU und verantwortlich für die Compliance-Verpflichtungen in Verbindung mit dem jeweiligen Produkt, das in die Europäische Union verkauft wird.

  • 950891051
  • MJCM SARL
  • 78 avenue des Champs Elysees Bureau 326, 75008 Paris, France
  • Paris
  • FR
  • 75008
  • mjcm190928@gmail.com
  • 0033 767213611