48mp180X FHD 48MP for HDMI USB Digital Industrial Microscope Camera Set AC100240V Condition: Item Type: Industrial Microscope Camera Material: Aluminum Alloy Module: 1135 Sensor: 48 megapixel CMOS Optical Format: 1/2.3 in Pixel Size: 1.335μmx1.335μm Interface: for HDMI (Type A).USB (Type B).Trans-Flash card For HDMI Image Resolution: 48 MegaPixel Video Resolution: 2K@30fps 1080p@60fPS For HDMI Resolution: 1920 * 1080p 60FPS Can output USB at the same time For HDMI scale: Supports 4:3, 16:9, 16:10 screens USB2.0 (driver free) : 1920 x 1080@30fps 1280 x 720@30fPS 640 x 480@30fps Trans-Flash Card: Maximum 128GB AWB: WB color correction/automatic/manual Set R.G.B value independently Exposure: Automatic/manual.AE values can be set Cross Line: 8 lines, color, width and position can be set Graduated Line: 2 lines. Dotted Line: 2 Lines. Color, width and position can be set Sharpness Contrast Color Gain: supported Mono Negative: Support Mirror: Horizontal and vertical mirror Language: English/Simplified Chinese Digital Zoom: Support Infrared Remote Control: Support Power Supply: Input AC100-240V output DC12V Power consumption: Maximum 0.15W 12V, 0.12A Lens interface: C/CS port Camera Size: 70 x 70 x 35mm / 2.8 x 2.8 x 1.4in Remote Control Battery: 1 x 2302 button battery (not included)  180 x C Lens Working Distance: Approx. 95mm / 3.7in Zoom C lens 0.5X Type C adapter Scale: 6.5:1 Objective Magnification Ratio 0.7-4.5x (about 10-180x on the display) Size: Approx. 180mm / 7.1in (L) x 50mm / 2in (DIA) (180x maximum working distance approx. 11.5cm / 4.5in) Solutions: No video or flicker on LCD 1. Check power supply.Check if the red LED is on.Press PowerKey to push it up. 2. Check the lens cap.Add lighting. LCD has black bar image distortion 1. Change the LCD resolution 2. Change the camera resolution There are dirty point 1. Inspect camera and lens for dust, then cleaning with anhydrous ethanol or detergent