Function: EG8010 is a Digital, Fully Functional Pure Sine Wave Inverter Generator Chip with Dead Time Control. It is used for DC-DC-AC Two-Stage Power Conversion Architecture or DC-AC One-Stage Power Frequency Transformer Boost Converter. Architecture, External 12MHz Crystal Oscillator, Can Realize Pure Sine Wave 50Hz or 60Hz Inverter Chip with High Precision, Distortion, and Harmonics. The Chip Uses CMOS Technology and Integrates SPWM Sine Generator, Dead Time Control Circuit, Amplitude Factor Multiplier, Soft Start Circuit, Protection Circuit, RS232 Serial Communication Interface, and 12832 Serial LCD Driver Module. Pure Sine Wave Inverter Drive Board EGS002 EG8010 IR2110 Drive Module Unipolar and Bipolar Modulation With Dead Time Control, Sets the Pin to 4 Dead Times: 300nS Dead Time 500nS Dead Time 1.0uS Dead Time 1.5uS Dead Time Real-Time Processing of Voltage, Current, and Temperature Feedback Pin Setting Soft Start Mode 1S Response Time Serial Communication Sets Output Voltage, Frequency, and Other Parameters The External Serial Port 12832 Floating Crystal Display Module Displays Voltage, Frequency, Temperature, and Current in the Inverter. Specification: Model: EG8010 PWM Carrier Frequency: 23.4KHz Power Supply: 5V Pin Sets 4 Types of Pure Sine Wave Output Frequency: 50Hz Pure Sine Wave Fixed Frequency 60Hz Pure Sine Wave Fixed Frequency 0-100Hz Pure Sine Wave Frequency Adjustable 0-400Hz Pure Sine Wave Frequency Adjustable Protection: Overvoltage, Undervoltage, Overcurrent, Overheating Protection Package List: 1 * Module Note: The Actual Product Color May Differ from the Photo Due to Lighting. There May Be a Slight Deviation in the Measurement of the Product. Note That the New Type and the Old Type of This Product Will Be Sent Randomly, and Please Make Sure You Don't Have Any Issues Before Placing Your Order.