UNIQUE FEATURE- Remove the oil filter cap faster, , and easier. Even if the oil filter cap is extremely tight, oil filter cup helps complete the job effortlessly. DURABLE- 4.6mm thickness metal around the square hole. NOMORE CRACKED when you try to twist it hard. LONG LIFETIME- For and durable, without the problems of broken in half, stripped the filter housing etc. (: put a or sandpaper inside the wrench will help to grab filer tightly) - for - oil filters. USAGE- Easy of Use for installation and removal of oil filter Allows the spin-on filter to be turned with a 3/8 inch drive socket wrench. Product Type: Oil Filter Wrench Manufacturer number: 7226277 for oil filters with part number 11427673541 stable profiled spring steel with 5mm thick reinforcement 3/8 inch ratchet connection 76mm 12 grooves Applicable to models: for models RnineT, R1200GS, R1200GS , R1200R, R1200S, R1200ST, R1200RT, R900RT (all air-cooled boxers), K1600GT, K1600GTL, HP2 , HP2 Megamoto, C602 Sport. The following models can also be equipped with different oil filters; this oil filter key is not suitable for these: K1200S, K1200R, K1200GT (from construction year 06), F800GS, F800R, F800S, F800ST, F650GS, S1000RR, S1000R, S1000XR Material:Metal colour:black Package Contents: 1 * Oil Filter Wrench Removal tool Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.