Frequency Conversion Voltage Converter 0-10V/5V F/V Digital to Analog Frequency Converter Interface Engraving Machine

8.95 CHF
+ 3.99 CHF Livraison

Frequency Conversion Voltage Converter 0-10V/5V F/V Digital to Analog Frequency Converter Interface Engraving Machine

  • Marque: Unbranded

Frequency Conversion Voltage Converter 0-10V/5V F/V Digital to Analog Frequency Converter Interface Engraving Machine

  • Marque: Unbranded
Prix : 8.95 CHF
Verkocht door:
8.95 CHF
+ 3.99 CHF Livraison

En stock

Nous acceptons les modes de paiement suivants

Description

1. Convert the frequency pulse signal from 0 to 10KHZ into an analog voltage signal of 0-10V. It can be used for interface conversion between PLC and frequency converter. Or interface matching control occasions such as motion control card and frequency converter. Other corresponding relationships or customized output 0-5V level converters can be customized, such as 0-1KHZ to 0-10V 0-200HZ to 0-10V, etc. The basic models are as follows, and the default model is -10K10V. 2. The input pulse level is 5V 12V 24V, which can be directly input without series resistance. However, the input signal frequency must be maintained for more than 0.5 seconds. 3. The output current is 5MA Use: 1. The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage. 2. The voltage range of the input power supply is 15-30VDC, and the recommended power supply voltage is 15-24VDC. At 12V level, the power supply cannot be powered by 12VDC. At least 15VDC power supply is required. If you must use 12V power supply, you can also customize a 12VDC power supply converter. At 24 level, the power supply needs to be powered by 24VDC 3. The signal input end uses optical coupler isolation. It ensures anti-interference ability. 4. If you need to use it with PLC, support NPN type. There must be a ground wire. 5. If you need to use it with an encoder, the encoder is required to rotate continuously at a constant speed for more than 0.5 seconds. 6. Frequency voltage conversion module, the response time is about 0.3-0.5 seconds. 7. If the signal input is turbine flow, etc., due to signal matching, an 817 optical coupler and a resistor must be added to match the flow meter to function normally. Color: Green Material: ABS Package Contents: 1 * Frequency voltage converter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Identifiant Fruugo: 411812057-871092607
  • EAN: 4712566636253

Livraison & retours

Expédition dans un délai de 3 jours

  • STANDARD: 3.99 CHF - Livraison entre jeu. 02 octobre 2025–lun. 13 octobre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Shen Zhen Shi Ji Yao Hui Mao Yi You Xian Gong Si
  • Shen Zhen Shi Ji Yao Hui Mao Yi You Xian Gong Si
  • bao an qu song gang jie dao bi tou she qu bei lu er hao ABA204
  • Shenzhen
  • China
  • 518000
  • tigerlionwin@outlook.com
  • 18927322795

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • 0utong GmbH
  • 0utong GmbH
  • Brehmstr,56
  • Duesseldorf
  • Germany
  • 40239
  • info@outong.de
  • 4921131054698