Specifications: Brand: GXservo Control system: PWM control system Temperature range: -20鈩?- +60鈩?br>Voltage range: 6.0V - 7.4V Test voltage: AT 6.0V / AT 7.4V Torque: 22KG.CM / 25KG.CM Speed: 0.2s/60掳, 0.18s/60掳 No-load current: 300MA/450MA Load current: 180OMA/2400MA Dead zone width: 2 microseconds Cycle: >15000 TIMES Working angle: 90掳卤5掳 Direction: Counterclockwise Pulse 1500 TO 2500 USEC Drive mode: field effect transistor drive Motor type: Iron core motor 1723 Potentiometer: indirect transmission Amplifier Type: Digital Size: 40*20*39MM Weight: 60G (excluding accessories) Ball Bearing: Double Ball Bearing Gear material: imported copper steel material Packing included锛?/b> 1x Digital Servo 1x Arm 1x set of Accessories Note: (1) Under the static working current, servo is energized, but there is no movement. (2) In the case of no-load current operation, servos move under no-load conditions. (3) The current of servo when outputting the maximum torque under the condition of locked rotor current (4) The baud rate can be modified to 500K, 250K, 128000, 115200, 76800, 57600, 38400 (5) The maximum number of available bus nodes depends on the power supply capacity and the allowable current specifications of the cable. (6) The stall torque is the maximum stall torque of the steering gear. The actual working torque is selected from 1 / 3- -1/5 of this value as suitable for the operating point.