Jura AEG Coffee Machines Screws Oval Head Bit Key Opening Repair Tool Specifications: 100% new and high quality Material: 316 Stainless Steel Color: Silver Size: 61mm*5.5mm Conversion: 1mm=0.039inch, 1inch=25.4mm Features: A special bit key to remove the screws on the back wall of coffee machines Made of Marine Grade 316 Stainless Steel, very tough and resistant to corrosion The key ring moves freely and immediately applicable or can easily be removed so that you can use a regular driver handle for access in the tightest places. Fit for Jura, Capresso, Krups, Franke, AEG ,Orchestro, Siciliana, Toscana, and all Nespresso machines Please beware that the tool does not fit the 5.8x4.8mm oval head bolts found in Krups drip coffee maker The bit will fit the proprietary oval head security screws in the following machines: Jura-Capresso: A1, A5, A7, A9, C5, C50, C55, C65, C70, C75, C9, C90, D6, E5, E8, E9, E10, E25, E30, E40, E45, E50, E55, E6, E60, E65, E70, E74, E75, E80, E85, ENA3, ENA4, ENA5, ENA7, ENA9, ENA Micro 1, ENA Micro 5, ENA Micro 8, ENA Micro 9, ENA Micro 90, ENA Micro Easy, F5, F50, F60, F70, F90, F7, F9, F900, Giga 5, Giga X3, Giga X7, Giga X8, Giga X9, XF50, XF70, S50, S55, S70, S75, S85, S90, S95, S7, S8, S9, J5, J6, J9, Z5*, Z6*, Z7*, Z8*, Z9*, X5*, X6*, X7, X9, X30, X70, X90, X95, Ultra, Cappuccinatore, M30, Scala, Scala Vario, Evolution, 201, 300, 401, 500, 601, 801, 2000, 3000, 4000, 5000, 6000 Capresso: C1000, C1300, C1500, C2000, C3000 AEG Cafamosa: CF 80, CF 81, CF 85, CF 90, CF95, CF 100, CF 120, CF 200, CF 300, CF 400, CF 500 Krups: Orchestro, Siciliana, Toscana, and all Nespresso machines. Franke: Saphira Package included: 1 x Repair Security Tool + 6 x Rubber Rings Notice: 1.Please allow 1-3mm error due to manual measurement,Please make sure you do not mind before you bid. 2.The colors may be a little difference for the different monitors displays, please understand.