Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Autopilot with 4G SD Safety Switch Buzzer PPM I2C RC Quadcopter Ardupilot

CHF 159.00
+ CHF 13.99 Spedizione

Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Autopilot with 4G SD Safety Switch Buzzer PPM I2C RC Quadcopter Ardupilot

  • Marchio: unbrand
Venduto da:

Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Autopilot with 4G SD Safety Switch Buzzer PPM I2C RC Quadcopter Ardupilot

  • Marchio: unbrand

CHF 159.00

Economizzare CHF 40.00 (20%)

Prezzo di vendita consigliato

CHF 199.00
Disponibile
+ CHF 13.99 Spedizione
Venduto da:

CHF 159.00

Economizzare CHF 40.00 (20%)

Prezzo di vendita consigliato

CHF 199.00
Disponibile
+ CHF 13.99 Spedizione

Accettiamo i seguenti metodi di pagamento

Descrizione

The product has passed strict CE certification. If you need a PDF or more complete test certificate, please leave a message. Note: 1.You can select White or Black shell of PIXHAWK flight controller, the hardware is same .White shell is more beautiful. If you need White shell, please leave a message. 2.If the package has3DR power Module,by default we will send XT60 plug 3DR power Module,if you need T ,please leave a message. 3. Pixhawk has many packages.We will send the package as you select. Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller Features: Pixhawk 2.4.8 support the latest official ardupilot firmware and PX4 firmware. 1. The advanced 32-bit ARM CortexM4 high-percompatible for mance processors STM32F427VIT62MB flash, can run NuttX CHIBOS RTOS real-time operating system; 2. 14 PWM / servo output; 3. Bus interface UART, I2C, SPI, CAN; 4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe; 5. Provide automatic and manual modes; 6. Provide redundant power input and failover; 7. Multicolor LED lights; 8. Provide multi-tone buzzer Interface 9. Micro SD recording flight data; Specifications: Interface 1 .5 high voltage compatible UART 1, 2 with hardware flow control 2. 2 CAN 3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input 4.Futaba SBUS compatible inputs and outputs 5.PPM Signal Input 6.RSSI PWM or voltage Input 7.I2C 8.SPI 9.3.3 and 6.6VADC input 10. External MICRO USB Interface If the package includes the 3DR Power Module, the current hardware of the 3DR Power Module has been fully upgraded. Previously, it only supported a maximum of 6S, but now it supports a maximum of 12S. By default, XT60 plug is sent. If XT90 plug is required, please leave a message. Radio telemetry V5 can be used compatible for wireless communication between pixhawk and computer or mobile phone. Radio telemetry V1 WIFI V1.0 and V2.0 use 8bit CPU, only support UDP WIFI V3.0 use 32 BIT CPU, support TCP and UDP. WIFI V2.0 and V3.0 use external antenna 5DB M9N GPS Module M9N is a GPS module commonly used in unmanned aerial vehicles, with the following characteristics and applications: High precision positioning: The M9N adopts advanced GNSS technology, supports multiple satellite navigation systems, and can provide high-precision position positioning incompatible for mation. compatible for unmanned aerial vehicles, it can achieve accurate positioning and navigation. Multi system support: The M9N supports multiple satellite navigation systems, including GPS, GLONASS, Galileo, BeiDou, etc. This allows drones to receive multiple satellite signals simultaneously, improving positioning accuracy and reliability. PX4FLOW Optical Flow Sensor Smart Camera PX4FLOW Optical Flow Sensor Smart Camera compatible for PX4 PIXHAWK Flight Control System MB1043 Introduction: - PX4Flow is an optical flow smart camera. It has a native resolution of 752-480 pixels and calculates optical flow on a 4x binned and cropped area at 250 Hz bright, outdoors, giving it a very high light sensitivy. Unlike many mouse sensors, it also works indoors and in low outdoor light conditions without the need compatible for an illumination LED at 120 Hz dark, indoors. It can be freely reprogrammed to do any other basic, efficient low-level computer vision task. Hardware Specifications: - STM32F405, 168 MHz Cortex M4F GFLOPS 128 + 64 KB RAM - 752-480 MT9V034 image sensor, L3GD20 3-axis Gyro - 4 mm M12 lens IR block filter - Size 45.5 mm x 35mm - Power consumption 115mA / 5V Package list: - PX4FLOW Optical Flow Sensor Smart Camera ,MB1043 ultrasonic moudle x 1 - Connecting cable x 1 OLED Module can display some message. MINI OSD PDB: VTX1000 is video transmitter,support 25MW-600MW,48 channel with heat sink abd 3DB antenna FPV Camera 450 Carbon Fiber Frame BLHELI ESC: A. Features A1: Use authentic electronic components to ensure high quality and enhance the current endurance ability of the ESC. A2: Based on BLHeli firmware, optimized compatible for high percompatible for mance with great linearity and much quicker throttle response. A3: Special designed compatible for multirotors, and compatible with fixed-wing aircrafts and helicopters. A4: Multiple protection features including Low-voltage cut-off protection / over-heat protection / throttle signal loss protection. A5: Throttle range can be configured and is fully compatible with all receivers, providing smooth, linear and precise throttle response. A6: All parameters can be programmed via using a transmitter, including default settings. B. Productspecification 2212 920KV Motor 1045 Propellers
  • ID Fruugo: 352540446-767657213
  • EAN: 9013978423338

Informazioni sulla sicurezza del prodotto

Si prega di consultare le informazioni sulla sicurezza del prodotto specifiche per questo prodotto descritte di seguito

Le seguenti informazioni sono fornite dal rivenditore terzo indipendente che vende questo prodotto.

Etichette di sicurezza del prodotto

CE Mark
Avvertenze di sicurezza: Important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged.

Consegne e Resi

Spedito entro 24 ore

  • STANDARD: CHF 13.99 - Consegna tra mar 18 novembre 2025–gio 27 novembre 2025

Spedizione da Cina.

Facciamo del nostro meglio per assicurare che i prodotti che ordini vengano consegnati integralmente e secondo le tue indicazioni. Tuttavia, nel caso dovessi ricevere un ordine incompleto, oppure articoli differenti rispetto a quelli che hai ordinato, o se c'è qualche altro motivo per il quale non sei soddisfatto dell'ordine, puoi effettuare il reso dell'ordine, o qualsiasi prodotto incluso nell'ordine e ricevere un rimborso completo per gli articoli. Visualizza la politica di reso completa

Dettagli sulla conformità del prodotto

Si prega di consultare le informazioni di conformità specifiche per questo prodotto descritte di seguito.

Le seguenti informazioni sono fornite dal rivenditore terzo indipendente che vende questo prodotto.

Produttore:
Le seguenti informazioni sono i dati di contatto del produttore del prodotto rilevante venduto su Fruugo.

  • Xinxiang Jintang
  • Xinxiang Jintang
  • Muyequhonglidadaowuhuanjiayuan7
  • xinxiang
  • CN
  • 453000
  • mychen2012@163.com
  • 13226730770

Persona responsabile nell'UE:
Le seguenti informazioni sono informazioni dei contatto della persona responsabile nell'UE. La persona responsabile è l'operatore economico designato con sede nell'UE, responsabile degli obblighi di conformità relativi al prodotto in questione venduto nell'Unione Europea.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • Calle Gran Via 49, 7 Dch.
  • Madrid
  • ES
  • 28013
  • ecrepservice@hotmail.com
  • 682797075