Modem/Router/Access Points -poe adapter injector Highlights generic brand poe adapter injector Description: 1.Cost Saving, no power wiring for WLAN AP, IP phone and any IEEE802.3af powered device taken 2.Meeting support IEEE 802.3af standards and above is capable of supplying power to PD devices 3.Small lightweight plastic case 4.Built-in universal 100-240V AC switching power supply 5.Standard RJ45 Cat.5 Ethernet data input and output, easy, convenient and simple to use Specification: 1. Voltage Input: AC 100-240V 50/60Hz 2. Voltage Output: DC 48V 0.5A 3.Dimension: Approx.8*6.5* 4.5cm (LXWXH) 4.CAT5 Ethernet Pin Usage: Data: 1,2,3,6 Power: +(4.5),-(7.8) 5.Compatible with: any 802.3af PoE power device like wireless access point, IP phone, IP camera, gateway, switch or more..... 6. Plug Type: EU Plug 7.Standards: 802.3af Package Include: 1 Piece POE Adapter (EU) Note: This injector allows you to power 802.3af compatible devices, without requiring an additional adapter. Simply plug the network cable (not included) into your network switch and into the ""LAN"" port, then plug the cable to your device into the ""POE"" port with your existing network cable. This adapter only support 10/100M connection, not support Gigabit ethernet connection, because Data & Power Out port using 4,5,7,8 pin as power transfer, do not connect Gigabit Ethernet device over the "Out" port, this will damage your device. This is an 802.3af compliant device, but it does NOT include the 802.3af compliant detection feature. It provides power NO QUESTIONS, so don't plug the ""POE"" side into something that isn't ready for it. Compatible all 802.3af PoE power devices like wireless access point, IP phone, IP camera, gateway, switch or more....