Diy Kits 2P2 electronic tube single lamp medium wave radio 2P3 radio Kits

19.95 CHF
+ 5.99 CHF Livraison

Diy Kits 2P2 electronic tube single lamp medium wave radio 2P3 radio Kits

Verkocht door:

19.95 CHF

Économisez 11.00 CHF (35%)

Prix de vente recommandé

30.95 CHF
En stock
+ 5.99 CHF Livraison

Politique de retour sur 14 jours

Modes de paiement:

  • Marque: Unbranded

Description

Diy Kits 2P2 electronic tube single lamp medium wave radio 2P3 radio Kits

Kit Description. Potentiometer with switch and regenerative adjustment. DC battery 14500 lithium 3.7 and 9 volt supply, screen voltage 9V. Screen current less than 0.5mA. Filament 2.4 volt supply: 7 pins positive, 1 pin negative, 5 pins empty. Filament current 30mA. Lamp low block illuminated red LED 2.4V supply, current limiting resistor 150 ohms. LED current 16mA. Transformer impedance conversion available after low resistance 8 - 32 ohms headphone listening. No transformer can be used to listen to high resistance 2000 - 4000 ohms headphones. The magnet bar coils need to be wound by yourself! With yarn wrapped and enamelled wire. Suitable for 2P3 case. Case not included! Batteries and speakers (not available) are also not included. Important note: the sound of a single tube machine without an antenna or amplifier is too low! Very impractical! Small amplifier on the phone with input line Bluetooth speakers or computer speakers can be used, the first debugging should be connected! And can only receive a few strong stations, so this kit is only suitable for DIY enthusiasts to play. After the completion of the effect of listening can not be achieved on the go! Style:Portable Type:FM color:Black Material:plastic Package Contents: 1 x 2P2 electronic tube single light radio board kit Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Identifiant Fruugo: 350817853-764917386
  • EAN: 4713369861828

Informations sur la sécurité des produits

Veuillez consulter les informations de sécurité du produit spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Numéro de pièce du fabricant: I500296018
Numéro de série: I500296018

Livraison

Expédition dans un délai de 10 jours

  • STANDARD: 5.99 CHF - Livraison entre jeu. 10 septembre 2026–lun. 21 septembre 2026

Expédition de Chine.

Retours

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles.

Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Shenzhen Haoyouqu Electronics Co., Ltd.
  • Shenzhen Haoyouqu Electronics Co., Ltd.
  • Tian'an Community
  • Shatou Subdistrict
  • Futian District
  • shenzhen
  • CN
  • 518000
  • [email protected]
  • 15320490316

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • ECLAT SOLUTION SARL
  • ECLAT SOLUTION SARL
  • Bureau 1145,37 Passage du Ponceau, 75002 Paris
  • Paris
  • France
  • 75002
  • [email protected]
  • +33 187652619